Beckman Coulter Cytomics FC 500 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Beckman Coulter Cytomics FC 500. Beckman Coulter Cytomics FC 500 14 сторінок. With cxp software
Також для Beckman Coulter Cytomics FC 500: Початок роботи (20 сторінок)
Друкувати сторінку
Naming LMD Files
Purpose: At each use of the software, adjustment of the User's settings controls how
LMD files will be named. This procedure describes multiple ways to set up the
Workspace Preferences to achieve the desired naming strategy.
A. General Guidelines
1. LMD filenames are controlled in the Workspace Preferences. To get to this, click
File, then Workspace Preferences, or press CTRL+W.
2. Workspace Preferences are NOT linked to a protocol; they are linked to a User.
This means if a person sets the Preferences but the Preferences are changed by
another individual logged in as the same User, the Preferences originally set by
the first person will not be present when he/she opens his/her desired protocol.
3. There are up to 4 user-input parts to a LMD file name: Sample ID1, Sample ID2,
etc. Many other automatic parts are also available, including the date, time, run
number, and protocol name.
4. When running in carousel mode, LMD file name MUST include both Sample ID1
& Sample ID2, in addition to other parts desired. When running a sample in
Single-Tube mode, LMD file name only needs to have Run Number.****
B. To generate filenames like: YourName SampleName Run#.LMD
1. Set Workspace Preferences (see A1 above) as follows
i. If running in Automatic mode
ii. If running in Single Tube mode
C. To generate filenames like: SingleComponent.LMD
1. May not do so in Automatic mode. Automatic mode requires that SampleID1 and
Sample ID2 be utilized.
1. In LMD File Name tab, check Sample ID1, Sample ID2,
Run #
2. In Acquisition Options tab, uncheck Edit Sample ID (this
will prevent the software from asking for manual entry of
the sample name after each tube is completed)
1. In LMD File Name tab, check Sample ID1, Sample ID2,
Run #
2. In Acquisition Options tab, check Edit Sample ID (this
will allow the user to manually enter the sample name after
each tube is completed)
3. When the sample stops running, the computer will prompt
for editing. In the first box, Sample ID1, enter name
(YourName above). In the second box, Sample ID2, enter
sample name (SampleName above).