anko XJ-14709C0 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Кухонна техніка anko XJ-14709C0. anko XJ-14709C0 11 сторінок.

PAUSING/ABORTING THE DEHYDRATION PROCESS

You can pause or abort the dehydration process at any time.

1. To pause the dehydration process, briefly push the ON/OFF button (8). The reading PA will blink and

appear on the display (7).

2. Push the ON/OFF button again to continue to the dehydration process.

3. To abort the dehydration process, hold the ON/OFF button down for 3 seconds.

4. The reading 00 will appear on the display.

END OF THE DEHYDRATION PROCESS

Once the dehydration process ends, a signal will sound for a few seconds and the dehydrator will

automatically switch off.

Pull the supply cord plug (4) out of the mains power outlet socket.

CLEANING AND MAINTENANCE

 Before cleaning, pull the supply cord plug (4) out of the mains power outlet socket.

 Let the dehydrator cool off completely.

 Remove the cover (1) and the drying trays (2).

 Use a damp cloth to wipe off the base unit (3), and never put it into water or rinse it with water.

 Wash the drying trays and the cover thoroughly with a mild detergent or put these parts in the

dishwasher.

 Then let all parts dry completely.

TECHNICAL DATA

Voltage : 220-240Va.c. 50-60Hz

Power

: 350W