Airtel SH960S-AT Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Приставки для телевізорів Airtel SH960S-AT. Airtel SH960S-AT 20 сторінок.

Getting Started

Pairing the remote control with the unit

Pairing

Point the remote to the STB IR receiver.

Press the

(Home) key for more than 3 seconds, It will set remote to start advertising.

After pairing once, the remote cannot be paired again unless the unpairing or reset remote process had

been performed.

Un-pairing

The remote can be unpaired by pressing

This will erase existing pairing information.

Reset

The remote can be reset to out of box condition by pressing

seconds.

Battery Replacement

Remove the battery cover on the remote control, and insert two R03 (size AAA) batteries with 4 and 5

matched correctly.

Teach Your Remote

box

live

mute

<Back> &

While our installation team will set up the Airtel Digital TV remote, for it to work

with your particular brand of TV, the following steps give you an overview of

programming the remote:

Step 1: Get the airtel remote to learning mode by pressing and holding

(Airtel Home)' and numeric '2' buttons together for 3 seconds. The LED

blinks twice to indicate that your airtel remote is ready to learn.

Step 2: Hold the source remote and airtel remote in front of each other

(3 cm-6 cm apart).

Step 3: Press and release the button (first of the airtel remote and then of the

source remote) which needs to be programmed in the airtel remote. The 5 keys

that support Learning feature are – tv, a/v, volume-, volume+, mute

Step 4: Press and release the source remote button that will be programmed

about 2-4 times, The indictor LED short blinks 2 times if learning is successful

and the new learnt code will replace the previous one.

The indicator LED will blink short 4 times if the learning fails. Go back to Step 2

and learn it again. Previous learnt code will be kept if it fails learning. If LED is not

on, It is due to IR learning timeout, then Go back to Step 1 and learn it again.

Step 5: Press '

<Digit 0>' button on your airtel remote to exit IR learning

mode.

Please note: Not all TV manufacturers and model numbers are supported.

(Options) for more than 3 seconds.

(Options) &

<Digit 9>for more than 3