anko HEG66 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Вентилятор anko HEG66. anko HEG66 16 сторінок. Patio fan.

4 Instructions for Use

Remove all packaging and unravel the cordset before operation.

The Fan Head can be adjusted Up and Down so as to blow air at the required

angle.

Turn off and unplug prior to adjusting.

To adjust, grasp the Fan Grills and tilt the head either upward or downward

to your desired angle.

Rotate the knob to either position 1 for low speed, 2 for medium speed or 3

for high speed.

Rotate the knob to position 0 to switch the Fan off.

To start the fan head oscillating from side to side, first ensure the fan speed is set to

either position 1, 2 or 3 then press the oscillating switch to the "I" (ON position). The fan

head will start to swing from side to side whilst blowing air.

The oscillating switch is located on the top of the fan motor housing.

To stop oscillation, press the Oscillating Switch to the "0" (off position).

Note: The fan must be running for the oscillating to function. If the Oscillating switch is

in the "I" (ON position) when the fan speed controller is set to the "0" (OFF position), the

fan will also stop oscillating.

Page 13 of 16