anko LD-K1045 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Чайник. anko LD-K1045. anko LD-K1045 7 сторінок. Cordless water kettle

* Do not fill the container with less than MIN. (0.5L) or more than MAX. (1.5L) of water. If there is not

enough water in the kettle, the appliance may overheat. If too much water is filled, the boiling water may

splash out.

* Be sure that the kettle is switched OFF before taking it off the power base.

* If the kettle is overfilled, boiling water may be ejected and cause scalding.

* The kettle is only to be used with the base provided.

* CAUTION: Do not operate the kettle on an inclined plane. Do not operate the kettle unless the element is

fully immersed. Do not move while the kettle is switched ON.

* CAUTION: To prevent damage to the appliance, do not use alkaline cleaning agents when cleaning outside

surface, use a soft cloth and a mild detergent.

* CAUTION: Position the lid so that steam is directed away from the handle.

* WARNING: Avoid spillage on the electrical connector.

* WARNING: Misuse may cause injury.

* WARNING: The heating element surface is subject to residual heat after use.

* WARNING: Do not remove the lid while the water is boiling.

* This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments,

– farmhouses,

– by clients in hotels, motels and other residential type environments,

– bed and breakfast type environments.

* For cleaning, please refer to section "Cleaning And Care".

CAUTION - Material damage

* Take care that any steam escaping from the appliance can damage wallpapers, wall cabinets or other items.

Turn the spout away from furniture, walls, window blinds etc.

* Do not use caustic, aggressive or abrasive cleaning products for cleaning.

Keep hard items away from the appliance.

* Although the kettle is protected from boiling dry, it must never be operated without water.

* If the cut-out switch switches off the kettle to prevent overheating and boiling dry, proceed as follows:

- Remove the kettle from the base.

- Allow the kettle to cool down for at least 15 minutes before refilling it with water or placing the kettle on

the power base.

* Only use the kettle with the power base provided.

* Furniture today is often coated with a wide range of varnishes and plastics and is treated with various

substances. Some of these products may contain substances that react adversely with the rubber feet on the

kettle power base and soften them. This can cause staining on the surface. Therefore, we recommend

placing a non-slip mat under the rubber feet of the kettle base.