anko LD-K3041A Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Чайник. anko LD-K3041A. anko LD-K3041A 9 сторінок. Cordless water kettle

IMPORTANT! Damage to exterior

* Do not use caustic, aggressive or abrasive cleaning products for cleaning the kettle exterior.

Cleaning

1. Remove the mains plug from the socket and let the water kettle cool down completely.

2. Wipe the base and power cord with a dry cloth.

3. Wipe the outside of the jug with a slightly moistened cloth.

4. Pull the sieve out of the spout.

5. Rinse it under running hot water.

6. Slide the sieve into the spout as far as it will go.

Descaling

IMPORTANT! during the below process DO NOT fill the kettle more than the min (0.5L) mark

on the kettle. Filling above the min. mark will cause over boil and spillage out of the spout.

The kettle must be descaled at regular intervals, especially if the power base is visibly encrusted

with lime scale. Regular descaling saves energy and increases the service life of the kettle.

For ecological reasons, we recommend using a three-to-one (3:1) solution of water and vinegar

or citric acid to descale the kettle.

Note: Mix the solution in a separate bowl or container and then fill the kettle up to the

Min. (0.5L) mark.

1. Let the solution soak in the kettle for about an hour, and then bring it to the boil.

2. Thoroughly rinse out the kettle with fresh water.

Alternatively, you may use commercially available kettle cleaning solutions. Please follow the

instructions provided with the cleaning solution.