anko LD-T1002 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Тостер anko LD-T1002. anko LD-T1002 8 сторінок.
Друкувати сторінку
Reheating cold bread or toast
1. Insert the cold bread
2. Press the push-down lever (2) down
button (5)
will
3. Press the REHEAT button (3). The LED on the REHEAT button (3)
Toasting frozen bread
1. Select normal degree of toasting.
2. Insert the frozen bread to be toasted.
3. Press the push-down lever (2) down
button (5)
will
4. Press the DEFROST button (4). The LED on the DEFROST button (4)
illuminate.
Caution
1. Remove all protective wrappings prior to toasting.
2. If toaster starts to smoke, press CANCEL button (5) to stop toasting immediately.
3. Avoid toasting food with extremely runny ingredients such as butter, jam, etc.
4. Never attempt to remove bread jammed in the slots without unplugging the
toaster from the electrical outlet first. Be sure not to damage the internal
mechanism or heating elements when removing bread.
5. The bread slot is for toasting regular bread slice.
6. To achieve uniform toast colour, we recommend that you wait a minimum of 30s
between each toasting time so that browning colour control can reset
automatically.
Crumbs
Crumbs will collect in the base of the toaster. Letting them build up can cause
a fire hazard so it is important to remove them frequently.
1. Switch off the power and remove the plug from the wall power outlet.
2.
Slide out
the Crumb tray(10) and empty out the crumbs.
3. Wipe the tray clean with a damp cloth,
4. Dry thoroughly before sliding back into the base of the toaster.
Glass Panel
The inner side of glass panel may require occasional cleaning.
1. Disconnect the appliance from mains power outlet and let the appliance cool
down completely.
that has popped up but gone cold.
illuminate.
illuminate.
locks. The LED on the CANCEL
until it
locks. The LED on the CANCEL
until it
Do not dishwash the crumb
5
will
illuminate.
will
tray.