anko T3206FE Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Тостер anko T3206FE. anko T3206FE 5 сторінок.

PRODUCT FEATURES

1. Variable width toasting slots

2. Carriage control lever

3. Reheat button

4. Cancel button

5. Electronic variable browning control.

6. Defrost button

7. Pull out crumb tray.

CAUTION: The bread may burn, therefore do not use the toaster

near or below combustible material, such as curtains.

IMPORTANT! To prevent fire, do not use this appliance with any

foodstuff product containing sugar content or with products

containing jam or preserves.

1. Insert the plug into a suitable mains supply socket.

2. Place up to two slices of bread, muffins, or bagels into bread slots.

3. Select the desired browning setting, from No.1 to No.6 on the

browning control knob. (No.1-lightest, No.6-darkest).

When using the toaster for the first time we suggest you toast on

number 3. Varying types of bread and personal preference may

require a different browning setting.

HIGH LIFT FUNTION: TO REMOVE SMALLER ITEMS SUCH

AS CRUMPETS AND MUFFINS, LIFT THE CARRIAGE

CONTROL LEVER APPROXMATELY 20MM ABOVE THE

STARTING POSITION.

4. Press the carriage control lever down until it clicks into place.

Toasting cycle will automatically commence. Please note: if the

toaster is not connected to mains power and switched ON at the

power point the carriage control lever will not 'click' into place.

5. The toaster turns OFF when the desired toast colour is achieved

and automatically raise the toast. The toasting process can be

stopped at any time by pressing on the Cancel button.

TOASTING FROZEN BREAD: To toast frozen bread, place the

bread into the bread slots and select the desired browning setting.

Press the carriage control lever down until it 'clicks' into place then

press the Defrost button.

REHEATING TOAST: The toaster allows you to reheat toast without

additional toasting. To reheat, place toast into bread slots, lower the

carriage control lever until it 'clicks' into place and press the Reheat

button.