anko 404201 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Блендер anko 404201. anko 404201 15 сторінок. Vacuum blender

CAUTION:

1. Please make sure the jar lid is placed correctly with the sealing ring covering

the jar spout. Otherwise it may lead to air leakage.

2. If there is an air leakage problem like not sealing properly, the preset vacuum

level would not reach. In this case, there will be all indicator lights flashing and

the warning buzzer will activate. Ensure the blade assembly with sealing ring is

screwed tightly into the jar bottom opening and the lid is properly placed and

sealed before proceeding.

3. If the jar is not placed and locked on to the base correctly, or the blade

assembly is not screwed in place, the blender will not function. Make sure the

jar and blade assembly are locked in place correctly.

4. Do not blend dry ingredients (for example pepper, beans, corn or star anise)

Vacuum

The vacuum function on the blender is programmed to vacuum ingredients in either the

Blending Jar or Storage Jar. This function is only for vacuuming. Press "vacuum" button,

the vacuum pump draws the air out of the container until the preset vacuum level is

reached. At the end of the vacuum process the machine will beep once, and all 4 indicator

lights will be ON.

Please note:

When the vacuum level in the jar reaches to the standard preset value , the vacuum

pump will stop automatically, and the machine will go into standby mode.

Set the rotary program to OFF, pull up the Filter Cap Lock/Release Paddle to open the

Upper Cover and rotate the blending jar anticlockwise to remove from the base.

When removing the jar lid, press the air release button on the top of the jar lid to

release the suction pressure (until no air flow sound). This will allow sufficient air into

the jar allowing easy removal of the jar lid.

CAUTION:

1. Please make sure the jar lid is placed correctly with the sealing ring covering the jar

spout. Otherwise it may lead to air leakage.

2. If there is an air leakage problem like not sealing properly, the preset vacuum level

would not reach. In this case, there will be all indicator lights flashing and the warning

buzzer will activate. Ensure the lid is properly placed and sealed before proceeding.