anko 42827A0 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Блендер anko 42827A0. anko 42827A0 14 сторінок. Multi function digital blender
Друкувати сторінку
1.
Place the motor unit (5) on a flat and stable surface:
o The surface must be dry.
o The suction feet on the bottom of the appliance must stick to it firmly.
o Make sure that there is a sufficient gap from the edge of the work surface
so that the device does not fall off during operation.
o Ensure there is clear space above (towards wall-mounted cupboards and
shelves) and to the sides in order to prevent any possible damage from hot
steam.
2.
Screw the
blade attachment firmly on to the bottom of the blender/soup jug:
•
Place the soup jug (3) with the blade attachment (4) onto the electric motor
unit (5) and twist it clockwise to secure it in place. Pay attention to the arrow
markings
for proper secure fitment.
•
Remove the lid (2) and pour in the ingredients you into the blender/soup jug
(do
not exceed the MAX marking in the jug).
•
Ensure to fit the lid (2).
•
Insert the supply cord plug into a mains power outlet socket that is easily accessible.
•
Switch ON the device: Press the Start / Stop button (C) once. The operating light (7)
will flash and the display (A) will switch ON.
3. Select
the Soup program. To do this, press the Function button (B) until the arrow on the
display (A) points to
4. Start the program: Hold the motor unit (5) securely with one hand and press the Start /
Stop button (C) once.
5.
If additional food is to be added
(2) and
then remove it upwards. Add ingredients through the opening in the lid.
6.
When the program is finished, switch OFF the device by pressing the Start / Stop button (C)
Once. The operating light (7) and the display (A) will go out.
7.
Remove the supply cord plug from mains power outlet socket.
8.
Wait until the blades have come to a complete stop, then twist the blade attachment
Housing (4)
with the soup jug (3)
unit (5).
9. Transfer the food
CAUTION: Food will be hot. Handle with care.
10. Unscrew the blade attachment (4) from the soup jug (3) by turning it counterclockwise and
rinse both parts (refer to "Cleaning" and "Storage" section). Do not allow
to dry on the product after use.
•
Danger of electric shock! Remove the power supply cord plug from mains power
outlet
socket before cleaning the device.
•
Danger of electric shock! Keep the electric motor unit, the main cable and the main
plug away from water or other liquids! Never touch them with wet hands when the
blender is connected to the main power.
•
The blade
attachment and the ice tube must not be cleaned in the dishwasher.
•
Danger of injury due to sharp blades! Take care when handling the blade attachments.
"SOUP".
during processing, twist the measuring cup (1) on the lid
counter- clockwise and remove it from the electric motor
from the soup jug (3) into a suitable vessel.
food residue