anko 42827A0 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Блендер anko 42827A0. anko 42827A0 14 сторінок. Multi function digital blender
Друкувати сторінку
When using electrical appliances, basic safety precautions should always be followed to reduce the risk
of fire. Electric shook and injury to persons, including the following:
This appliance is for household use only, not designed for commercial use.
Sharp cutting blades. Be careful when handing, emptying the bowl and during cleaning.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Misuse may cause injury.
If the supply cord is damaged, DO NOT use. For electrical safety, any repairs to the product
should only be carried out by a qualified electrical person only or the product must be disposed.
CAUTION: Be careful if hot liquid is poured into the blender as it can be ejected out of the
appliance due to a sudden steaming.
Ensure that the blender is switched OFF before removing it from the base (motor unit).
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched ON and OFF by the utility.
Please read these instructions carefully for safety and to get the best results from your
appliance.
To protect against risk of electrical shock, do not put cord, plug or unit in water or other liquid.
Unplug from mains power outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
The use of attachments not recommended by the manufacturer may cause a risk of injury to
persons.
Do not let cord hang over edge of table or counter or touch hot surfaces.
Do not place the appliance on or near a hot gas or electric burner or in a heated over.
Avoid contacting moving part.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may be used but must be used only when the
blender is not running.
IMPORTANT! Always operate blender with lid cover in place.
IMPORTANT! Do not process any hot liquids or ingredients in the large or small cup.
Switch off the appliance and disconnect from mains power before changing accessories or
approaching parts that move in use.
Note: The appliance incorporated with a non-self resetting thermal motor protection circuit to
protect the motor from overheating. If the motor shuts OFF while in use; unplug the unit from main
power outlet. Remove the blender / soup jug / cup from motor unit and free the blade of any
obstructions. Allow the unit to cool down for 30 to 40 minutes. After then, plug the unit back into to
mains power for normal operation.