Becos TS8-MS Overdrive Midi Switching Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Becos TS8-MS Overdrive Midi Switching. Becos TS8-MS Overdrive Midi Switching 6 сторінок. Analog overdrive with external relay switching and midi functions
Також для Becos TS8-MS Overdrive Midi Switching: Швидке налаштування (4 сторінок)

Друкувати сторінку

Examples of ways to configure an external MIDI Controller to

control TS8-MS and MIDI amplifier channel switching

Rocktron MidiMate Controller

Example 1 - Control pedal Bypass and an amplifier's Channel / Feature switching

using Program Change MIDI commands

We will make two presets on the midi controller. Preset MIDI 1 will put TS8-MS Overdrive pedal in

Bypass and preset MIDI 2 will switch the overdrive on. You can also edit the name of these presets

for better reading.

1. Connect TS8-MS pedal in your audio rig;

2. Connect midi output of the midi controller (or output/through of another midi device in your

rig, if you have more midi devices) to midi input on the overdrive pedal;

3. Use the rotary switch inside TS8-MS Overdrive pedal to set midi receive channel = 2;

4. Put the midi controller in Controller mode;

5. Choose preset MIDI 1 on the midi controller and and press 2ND button to edit this preset:

a. scroll to MIDI CHANNELS submenu and set midi transmit channel of S2CH = 2;

this is the same midi channel number programmed in TS8-MS; you can set the other

remaining SETS to control other midi devices on different channels; this setting is

global on MidiMate controller, which means you only have to set it once;

b. continue to scroll to PROGRAMABLE PATCH CHANGES submenu and set

program change number of SET2 = 100; when this program change number is

transmitted over midi channel 2, the TS8-MS Overdrive will be Bypassed;

press 2ND button again to save and exit the edit mode of this preset.

6. Choose preset MIDI 2 on the midi controller and press 2ND button to edit the preset:

a. scroll to PROGRAMABLE PATCH CHANGES submenu and set program change

number of SET2 = 104; when this program change number is transmitted over midi

channel 2, the overdrive pedal will be on;

b. press 2ND button again to save and exit edit mode.

That's it! Now, when you select preset MIDI 1 on the midi controller, the TS8-MS Overdrive pedal

will be put in Bypass and when you select preset MIDI 2 the overdrive will be on.

If you need to switch amp's channel / feature concomitantly with switching overdrive on, all you have

to do is set a different program change number to be transmitted by the midi preset, corresponding to

your switching needs. For example, if you need to engage the overdrive and switch amp's channel at

the same time, you may use Relay 1 in the pedal which must be switched on (Tip-To-Ground) when

the overdrive is on. Edit preset MIDI 2 in the example above and set program change number of

SET2 = 107 in the PROGRAMABLE PATCH CHANGES function. See Table 2 for all available

switching options using Program Change commands.

Disclaimer: Technical knowledge is required for installation of electric devices, electronic circuits and parts. You, the buyer or user, are the only person in charge for solving electrical,

mechanical or other technical problems that may arise during installation or usage of our products. We assume no responsibility for the way you use the purchased product and we will

not be liable for any loss and destruction of any kind, including but not limited to loss of profit or other damages occurring in relation to implementation and usage of purchased product.

You are, as a buyer and/or user, the sole person responsible for the risks involved by installation and usage of the purchased product and we are not liable if you're breaking an

instrument, an amplifier, or other electric or electronic equipment, or properties, or if you hurt yourself or others in the process. All brand names mentioned onour webpages and in the

documentation provided with or for the products we fabricate and sell are property and registered trademarks of their owners. We are not affiliated with neither of them. Media files,

documents and information provided throughout our website is property of BECOS, published under copyright and protected by law.