Drucker Diagnostics Horizon 6 Flex Посібник оператора - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник оператора для Лабораторне обладнання Drucker Diagnostics Horizon 6 Flex. Drucker Diagnostics Horizon 6 Flex 14 сторінок.
Також для Drucker Diagnostics Horizon 6 Flex: Посібник з експлуатації (10 сторінок)
Друкувати сторінку
Q
S
UICK
TART
The screen display alternates between the name of the currently selected cycle and its parameters. For convenience,
the first cycle is preset for common applications and can be reprogrammed to your validated cycles:
(1) Setting 1
This setting is factory preset to 3,500 RPM at 1600xg for 10 minutes
Cycle Selection
To ensure repeatability, the centrifuge can be locked either on one cycle (Single Cycle Lock) or restricted to the saved
cycles (Preset Lock). The Single Cycle Lock also prevents making changes to the parameters of the selected cycle.
The Preset Lock allows selection of any saved cycle but prevents changing the parameters of saved cycles.
Drucker Diagnostics – Customer Service: +1-814-692-7661 –
Begins running the cycle displayed on the screen. The lid must be
Start
closed.
Allows access into the rotor chamber by engaging the unlocking
Unlock
mechanism. Entry is only possible when the rotor is stopped.
Pressing the UNLOCK button during operation will terminate the
Stop
run and unlock the lid after the rotor has come to a stop.
Press the up and down buttons next to the screen to select the
desired saved cycle.
| Page 5