Dry & Store Zephyr Інструкція з експлуатації Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Осушувач повітря Dry & Store Zephyr. Dry & Store Zephyr 6 сторінок.
Друкувати сторінку
Physical Properties
• Outside dimensions are 150 mm x 92 mm x 72 mm (5.9" x 3.6" x 2.8").
• The drying tray has two compartments: the forward drying area measures 80 mm x 65 mm x 24 mm
(3.2" x 2.6" x 1.0"), and a small Dry-Brik
• Weight as shipped is approximately 582 g (1 lb, 4 oz).
Power Supply
Input: 100-240 volts AC, 50/60 Hz, 1.0A max. Output: 24 VDC at 15W max. Zephyr power supplies are
interchangeable with Dry & Store
standards, and carry GS (Germany), PSE/JET (Japan), C-Tick (Australia/New Zealand), KC (Korea), and
SABS (South Africa) certifications.
Operating Features
• A ball-bearing fan continuously circulates warm, dry air for the entire operating cycle, causing moisture
to move out of the hearing instruments by diffusion. A desiccant in the airflow path strips the moisture
out of the air, ensuring continuous dry operation.
• Zephyr will dry cerumen, making it easier to remove from the hearing instrument.
• Zephyr turns off automatically after 8 hours unless the
• Batteries do not have to be removed from hearing devices.
• Zephyr is not designed to diagnose, prevent, monitor, treat, or alleviate disease.
Rechargeable Canister Desiccant (optional)
A small number of international configurations are shipped with an optional metal canister desiccant
instead of a Dry-Brik. The protective label should be removed from both sides before use. As moisture is
adsorbed by the desiccant, the indicator will change from orange (good) to green (bad). The color change
signals that the desiccant can no longer adsorb moisture. To restore function, place the metal can in a
conventional oven for a minimum of 3 hours at a temperature of 105°-150°C (225°-300°F). The color will
change back to orange. Warning: Never place metal in a microwave oven! After recharging, allow
the hot metal can to cool before use. Best results will occur if the can is covered by a glass during the
cooling period.
Zephyr
Global and are CE Marked. They are certified to ETL, UL, and CSA
®
by Dry & Store
compartment is in the rear of the tray.
®
/
button on the side is pressed.
on
off
18
®
Group 4, Rev F