DRY AGER DX 500 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Сушарка DRY AGER DX 500. DRY AGER DX 500 17 сторінок.
Також для DRY AGER DX 500: Посібник користувача (14 сторінок), Інструкція по заміні (2 сторінок)
Друкувати сторінку
Dimensions DX 500
Required ventilation shafts are absolutly necessary.
1
Minimum size: 200 cm
2
Overall dimension with opend door: 615 mm.
2
Overall dimension body + door (protruding): 610 mm.
3
Covering of distance possible by DRY AGER moulding
4
Available as an accessory in our shop: www.dry-ager.com/shop.
®
. Possible on the side or at the back.
Electrical connection
Only operate the appliance with alternating current (AC). The
permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the
section entitled Description of the appliance. The socket
must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the
appliance and must be easily accessible.
Do not connect the appliance using an extension cable or
extension socket.
Do not use stand-alone inverters (conversi-
on of direct current to alternating current/
thre ephase cur re nt) or e ne rgy-saving
plugs. Risk of damage to the electronic
control system!
Interior Light
The interior of the appliance is lit by an LED light strip at the top
of the interior container.
The light intensity of the LED light corresponds to laser
class 1/1M.
Important
If the cover is removed, do not look directly at the
light through optical lenses from close distance. This can-
damage your eyes.
Safety lock
The lock in the appliance door is equipped
with a safety mechanism.
Locking the appliance:
• Insert the key as shown by arrow 1.
• Turn the key 90°.
To unlock the appliance, the
same procedure must be repeated.
7