Absolare Push-Pull Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Absolare Push-Pull. Absolare Push-Pull 14 сторінок.
Також для Absolare Push-Pull: Посібник користувача (15 сторінок)

Друкувати сторінку
6.  Operating  the  Unit  
6.1.  General  Operation  
Before turning on the unit be sure that all tubes are installed and all cables
connected correctly.
If you have changed 845 tubes you should first minimize the bias settings (by
rotating to counter-clockwise) before turning-on the amplifiers and re-adjust the bias
settings. Please refer the bias settings section (6.2.1).
After turning on, the power indicator LED on the front plate will start to blink. Sound
will only be audible after all capacitors inside are charged and internal voltages are
stabilized (after that the indicator LED starts to illuminate continuously).
Absolare Push-Pull Amplifier will be ready to operate approx. 40 seconds after
turning on the power, but attaining full performance may take 15 to 30 minutes.
6.2.  Setting  the  Bias  Levels  
Measurement points for the bias levels are at the back cover:
10
ABSOLARE Push-Pull Amplifier User Manual 0.9