Anolis ArcPix Інструкція користувача

Переглянути онлайн або завантажити pdf Інструкція користувача для Світильник Anolis ArcPix. Anolis ArcPix 4 сторінки. Outdoor 4 mc

The Anolis ArcPix Outdoor 4 MC is a multi-purpose, high-intensity RGB LED node for generating a wide

variety of effects without the limitations associated with a solid fixture unit.The unit´s high light output can be

pixel mapped and therefore can be controlled and used for large scale matrix applications, as well as used for

individual illuminating needs.

1.Attention

Consider the respective national norms during the installation!

Do not install the module near high inflammable liquids or materials

Do not allow anything to rest on the module

Do not install the unit near naked flames.

Avoid using the unit in locations subject to possible impacts.

Do not attempt to dismantle or modify the unit.

Do not install the module in badly ventilated location

2.Installation

The ArcPix Outdoor 4 MC can be arranged in any position orientation. Three holes of diameter of 4.3mm in the

ArcSource Outdoor´s base serve for mounting on the non-flammable surface. The light head can be adjusted

against the base in range of 120°.The ArcPix Outdoor units should be connected to the ArcPix Power. See

the ArcPix Power user manual for full details of mains power requirements, DMX operation and installation.

As the ArcPix Outdoor 4 MC is equipped with one input cable only, the T-connector Chogori has to be used

for connecting the ArcPix modules each other.

Avoid looking directly into the LED light beam at close range!

The enclosed adapter stand (with M5x45 screw) allows to place light head higher:

User instructions

ArcPix Outdoor 4 MC

CAUTION!