Dryfast DFV4500 Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентилятор Dryfast DFV4500. Dryfast DFV4500 20 сторінок. Multifunctional fans

EN
Unplug the fan from the mains supply and secured
against reconnection
All rotating parts must be stationary.
All safety and working regulations EN 50110-1 and
IEC 60364 must be observed.
They must be carried out by qualified staff
according to EN 50110-1 and IEC 60364.
Regular cleaning of the fan will benefit its service
life.
Periodic maintenance and cleaning should be
done at least every 6 months.
Run the fan at full power for at least 2 consecutive
hours monthly to evaporate any moisture that may
have entered and to prevent rust in the bearings.
Before cleaning, first close the condensation holes
in the motor using the condensation plugs.
Check the fan and any air lines regularly for conta-
mination.
The complete fan may be cleaned with a damp
cloth or dry brush.
Do not use aggressive cleaning agents when clea-
ning.
Prevent water from entering the motor or electrical
wiring.
After cleaning, always remove the condensation
plug which is at the lowest point in the motor. Also
run the fan at full speed continuously for 2 hours at
full power to evaporate any moisture that may have
entered and to prevent rust in the bearings.
The bearings are maintenance-free. The service life
of the bearings is c.a. 30,000 hours in normal use.
After this period, the bearings should be replaced.
Regularly check the condition of the bearings
by turning the impeller by hand. This should be
smooth and noiseless.
Transport and store the fan only in the original
packaging.
Storage temperature: between -40°C and +60 °C.
Avoid hitting, bumping and unnecessary stress on
the packaging and/or the fan.
If the fan's packaging has suffered damage, have
the fan checked for damage.
Warranty applies only to appliances purchased
from Dryfast (through a dealer).
The manufacturer provides a one-year manufactu-
rer's warranty from the date of purchase on all
parts except the power cable
In case of any modification, both electrical and me-
chanical, as well as abuse of the unit through im-
proper voltage use, the warranty becomes null and
void.
To obtain replacement parts under warranty, proof
of purchase is required.
4