Dryflow BulletDri Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Сушарка Dryflow BulletDri. Dryflow BulletDri 12 сторінок.

WARRANTY

All of our dryers are designed and manufactured to provide years of dependable performance.

Component parts are guaranteed to be free of defects in material and workmanship for a period of one

(1) year from date of original invoice. This guarantee will be honored provided that the dryer is installed

and maintained in accordance with the instructions. Parts damaged during the installation are the

purchaser's responsibility. The warranty covers defects exclusively, and only liability for the replacement of

defective parts will be accepted. This warranty does not cover wear and tear, or misuse and abuse.

Defective parts must be returned, accompanied by the serial number, to the point of purchase. This

warranty is granted solely to the original purchaser of the unit and is subject to registration.

Periodic cleaning of the unit is recommended. Remove cover and clean dryer dust lint.

Stainless steel is highly resistant to rust, but there are some very strict cleaning and maintenance rules to be

followed to prevent damage to its appearance.

Apply neutral detergents formulated for these purposes (non-ionic surfactants and citric acid). Apply

the detergent with soft cloth. Be careful with abrasive cloths. They may scratch the surface. Rinse with

water until all the detergent has gone.

Residue from hygiene products, liquid soap, shampoos, bath gel, etc, can also damage surfaces.

Rinse the surface with plenty of water after use.

Limescale stains can be prevented by drying the surface with a soft cloth after use.

Limescale from mains water: Apply a solution of one part vinegar and three parts water directly to the

stains and leave to work for a few minutes. Then rub with a soft cloth or damp sponge. Then give it a final

wash with plenty of water and neutral soap to ensure it is thoroughly rinsed.

Unacceptable practices (loss of guarantee)

- Do not apply detergents with abrasive products or which contain:

Hydrochloric acid

Sodium hypochlorite (bleach)

Formic acid.

- Do not use abrasive utensils like metal sourcing pads or abrasive sponges.

- Do not spray the detergent on the surface, because the liquid can get into the openings or cracks in

them and cause damage.

- Do not use anti-limescale and descaling cleaning products. They are not suitable for cleaning satin

stainless steel.

- Do not use silver cleaners, contain chlorides that attack stainless steel.

Bleach and descalers are often applied to bathroom equipment and left to work for a time. This leads to the

release of gases that contain chloride, which together with the water in the surface cause chlorides to run

down the surface of the stainless steel. This rusts both internal and external surfaces.