Daikin Altherma 3 R F Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Кондиціонери Daikin Altherma 3 R F. Daikin Altherma 3 R F 20 сторінок.
Також для Daikin Altherma 3 R F: Посібник з експлуатації (12 сторінок), Посібник з експлуатації (16 сторінок), Посібник з експлуатації (16 сторінок), Посібник з монтажу (12 сторінок)
Друкувати сторінку
4 Operation
NOTICE
Make sure to modify the setting of the energy prices at the
end of the incentive period.
To set the gas price in case of an incentive per kWh renewable
energy
Calculate the value for the gas price with the following formula:
▪ Actual gas price+(Incentive/kWh×0.9)
For the procedure to set the gas price, see
page 11.
To set the electricity price in case of an incentive per kWh
renewable energy
Calculate the value for the electricity price with following formula:
▪ Actual electricity price+Incentive/kWh
For the procedure to set the electricity price, see
electricity price" on
page 11.
Example
This is an example and the prices and/or values used in this
example are NOT accurate.
Data
Gas price
Electricity price
Renewable heat incentive per
kWh
Calculation of the gas price:
Gas price=Actual gas price+(Incentive/kWh×0.9)
Gas price=4.08+(5×0.9)
Gas price=8.58
Calculation of the electricity price:
Electricity price=Actual electricity price+Incentive/kWh
Electricity price=12.49+5
Electricity price=17.49
Price
Gas: 4.08 /kWh
Electricity: 12.49 /kWh
4.7.3
Using and programming schedules
About schedules
Depending on your system layout and installer configuration,
schedules for multiple controls may be available.
You can:
▪ Select which schedules you currently want to use.
▪ Program your own schedules if the predefined schedules are not
satisfactory. The actions you can program are control specific.
Possible scheduling screens
Name and location
[1.2] Room > Heating
Program the desired room temperature
schedule
in heating mode.
[2.2] Main zone >
Program the desired leaving water
temperature for the main zone in
Heating schedule
heating mode.
[3.2] Additional zone >
Program the desired leaving water
Heating schedule
temperature for the additional zone in
heating mode.
User reference guide
12
"To set the gas price" on
"To set the
Price/kWh
4.08
12.49
5
Value in breadcrumb
[7.6]=8.6
[7.5.1]=17
Usage
Name and location
[4.2] Space heating/
See
cooling > Operation
mode" on
mode schedule
[5.5] Tank > Schedule
Program the domestic hot water tank
temperature for your normal domestic
hot water needs:
▪ Comfort setpoint
▪ Eco setpoint
▪ Reheat setpoint
[7.4.2] User settings >
Program when the unit has to use which
Quiet > Schedule
quiet mode level:
▪ Off
▪ Quiet
▪ More quiet
▪ Most quiet
[7.5.4] User settings >
Program when a certain electricity tariff
Electricity price >
is valid.
Schedule
Example of programming a schedule
See
"4.7.4 Schedule screen: Example" on
4.7.4
Schedule screen: Example
This example shows how to set a room temperature schedule in
heating mode for the main zone.
INFORMATION
The procedures to program other schedules are similar.
To program the schedule: overview
Example: You want to program the following schedule:
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Prerequisite: The room temperature schedule is only available if
room thermostat control is active. If leaving water temperature
control is active, you can program the main zone schedule instead.
1 Go to the schedule.
2 (optional) Clear the content of the whole week schedule or the
content of a selected day schedule.
3 Program the schedule for Monday.
4 Copy the schedule to the other weekdays.
5 Program the schedule for Saturday and copy it to Sunday.
6 Give the schedule a name.
To go to the schedule:
1 Go to [1.1]: Room > Schedule.
2 Set scheduling to Yes.
3 Go to [1.2]: Room > Heating schedule.
EHVZ04+08S18+23DA + EHVZ04+08S18+23DJ
Usage
"4.4.2 Setting the space operation
page 7.
page 12.
Daikin Altherma 3 R F
4P495251-1B – 2019.06