DRYWISE 600591440004 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для 3D-принтери DRYWISE 600591440004. DRYWISE 600591440004 14 сторінок. Pre-heater add-on for drywise dryer

Друкувати сторінку

Warranty

8.1.

General

Thought3D Ltd grants a standard warranty on the Drywise Pre-Heater product

("Product") in the country where the product was purchased. From the date the prod-

uct is sold and delivered to an end-customer for the first time, as evidenced by the

original customer's purchase invoice, Thought3D Ltd warrants the product is free

from defects in material, design and workmanship for a period of twenty four (24)

months for countries inside the European Union and twelve (12) months for countries

outside the European Union.

Only the original purchaser is entitled to claim warranty and the warranty period is

limited to his/her lifetime. For a warranty claim to be valid

(i)

notification must be made before the end of the warranty period,

(ii)

conform to any additional stipulations of the warranty, as defined below,

(iii)

must be substantiated with the original customer's purchase invoice,

(iv)

the serial number sticker must still be on the product(s) and

(v)

the product must be returned in the original packaging.

Since customers will only be entitled to make a warranty claim on submission of the

original invoice and packaging, we advise that both the invoice and official packaging

are kept in a safe place. If the original packaging is not available anymore, Thought3D

Ltd reserves the right to accept or reject the return, or apply depreciation of the prod-

uct.

The customer – provided that they are a natural person who is not acting in the

course of their profession or business – may claim the rights to which they are entitled

under the warranty without prejudice to their rights or claims in accordance with the

law.

8.2.

Conditions

The Thought3D Ltd warranty is granted under the explicit condition that:

•

The Product was sold, delivered and assembled by Thought3D Ltd or a

recognized Thought3D Ltd reseller.

•

The Product was newly manufactured on the date of purchase and not sold as

used, refurbished or manufacturing seconds.

•

That the installation and maintenance instructions as described in the manual for

the Product, provided by Thought3D Ltd, have been observed.

•

If a part of the Product is repaired or replaced during the warranty period, the

warranty period still remaining for the entire Product will apply to this part.

However, repair and/or replacement will not extend the warranty period.

Drywise Pre-Heater User Manual