DS18 JK-HARNESS Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери DS18 JK-HARNESS. DS18 JK-HARNESS 16 сторінок.

Using the ¼ Drill Bit open up this two holes where the factory bolts was located, then locate

the SQBASS bracket "B" and secure it using a pair of the "A" screws but do not tight

them yet.

Locate the SQBASS Bracket "A" and secure it on the SQBASS using the "B" screws supplied

and tight them just enough but not too hard (Screw can break easy).

Locate the SQBASS under the seat and use a pair of "A" screws and secure the bracket

but do not tight them yet, then using the "B" screws secure the other side of the SQBASS

to the bracket "B" as you can see in the picture.