DS18 DSP12i Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису DS18 DSP12i. DS18 DSP12i 12 сторінок.

WIRED MULTI FUNCTION CONTROLLER

With the remote controller connected to the DSP, you can enjoy the following

operation to the DSP:

1. Main volume control, Slave volume control, Mute

2. Switch between the last song and next song from Bluetooth/USB Drive

3. Switch Input source

4. Switch Presets

HI: High level input

LOW: Low level input

AUX: AUX input

OPTICAL: Optical input

BTA: Bluetooth Audio Streaming

USB: USB Drive Audio Player

A. When connected to

DSP unit, the LED will light

up blue color when the

amplifier is turn on. This is

Main (all channels) output

level control mode.

Note: Group level control mode only control the output level of the channels that

chosen on the software as SLAVE. If no channel is chosen as SLAVE on DSP setup,

there'll be no fuction at this mode.

Panel Introduction

Source: Input source switch

Memory: DSP Presets switch

Memory1.2.3.4: DSP presets

Previous and next song: only for Bluetooth

audio and USB Drive audio input.

Knob in the middle: Main level control,

Group level control, Mute.

B. Push the knob to Mute

(LED changed to red

color), push again back to

Main level output control.

C. Long push the knob for

over 3 seconds the LED

change to green for Group

level control mode.