DSB AF-75 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Знищувач паперу DSB AF-75. DSB AF-75 6 сторінок. Auto feed paper shredder
Друкувати сторінкуAuto feed paper shredder
Model: AF-75
ASSEMBlY
NOTE:
This shredder
will operate
only when used with the supplied
baske!. The supplied
basket has a built-in
safety feature wh ich
prevents
shredder
from operating
if used with
any other basket or if improperly
assembled.
I&CAUTlONII
This shredder
contains
sharp edges on
the
underside
ofthe
shredder
head.
1.:.
=~.:..:::.J'. Use caution when positioning
the shredder
head onto the baske!.
OPERATION
Check machine for damage or defect;some particles of paper are normal due toproduct
testing.
1.
Place machine on the complanate ground,and
Plug power cord into
any
easily reached standard
outlet.
2.
Make sure the waste
basket
in correctly
position.
3.
To use,have the power switch,located on the right side of the machine,in the ON (I)
position.
4. Open the auto feed paper
tray,
you will hear a slight click when the tray is the correctly
position.
5. Use the coin or other tools to revolve knob anticlockwise,make
sure the slot on
the
knob is on
aclinic
position.
6. The machine will be
ready
to
work
when the power light tum green
OPERATION
AUTO
1.The
machine will
be ready
to work on AUTO Setting when you turn on the power
switch.
2.Three inlets inlude 2 paper inlet and
1
CD
inlet
will be ready to work when the machine under
AUTO
mode.
And machine start working when you insert shredding staff into any one of the inlet.
Mahiche stop
working
if you insert shredding staff to 2 or
3
inlets at one time.
3.The machine will stop
automaticaly
and resume to AUTO mode
after
finish
shredding.
4.lf BINFULL light on,please clear the waste paper/CD accordingly
5.lf OVERHEAT light on,Please stop the machine for moments until it's
cool
down.
6.if OVERLOAD light on ,check if the shredding pieces inserted is out of rated capacity.please
reduce the pieces
to
the rated capacity and press AUTO.
REV
1.Press REV switch to clear the jammed paper/CD/Credit
card.
2.For paper jammed in Auto feed inlets,you mayaiso follow the step printed on the machine to clear
the
Jams.
FWD
1.Press FWD,the unshredded pieces will be totally shredded and
fall
into the bin.
2.Press FWD and FWD in turn will help to clear the Jammed pieces inside the
blade.