DAISHIN SBX26W Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Фреза для щіток DAISHIN SBX26W. DAISHIN SBX26W 7 сторінок.
Друкувати сторінкуThank you very much for purchasing our brush cutter.
Our top priority is customer safety. Before use, please be sure to read this manual which explains safety procedures, assembly of the
machine and instructions for use, etc. Please use the machine safely and efficiently at all times. If you have any questions, please
contact the store where you purchased our product.
CAUTION
NOTES FOR SAFE USE
Be sure to observe the following for safe use of the brush cutter.
1. General matters.
(1) The brush cutter is designed to cut weeds. Never use it for any other purpose, such as cutting tree branches, etc.
(2) Wear clothes with tight fitting long sleeves and trousers (no loose sleeves or trouser bottoms) , a protective cap
(safety helmet), gloves, dust- proof glasses and safety shoes.
(3) Prepare a whistle, an axe, and a hatchet.
(4) Be sure to put the blade guard in the specified position.
(5) Do not use the machine when tired, under the influence of alcohol or after taking medication.
(6) Children, pregnant women or untrained personnel must not use the machine.
(7) Do not lend the brush cutter to people who are not properly trained or well - experienced with its operation.
(8) Do not use the machine during the night or in bad weather conditions.
2. Before operating:
(1) Machine inspections
$` Use the machine only after making sure that there are no abnormalities.
Check items:
0ûMissing or loose screws.
0ûLubricant Oil, grease and fuel are in their proper locations.
0ûThere are no fuel leaks.
$a As a 2-cycle engine is used, the mix ratio of fuel is 25 (gasoline) to 1 (oil).
Mix fuel carefully, because an improper mixing ratio will result in
burning or excessive wear of the engine.
$b Make sure that the engine is cooled down before refueling. Refuel the machine in a safe area.
$c Fuel is flammable. Never smoke when refueling. Never refuel near fire.
Be sure to keep the machine away from fire. If fuel spills whilst refueling, thoroughly wipe it up before
continuing.
$d Use the machine after making sure that there are no abnormalities of the cutter mechanism: e. g ., the blade is mounted
securely, the teeth of the blade are properly set and the cutter is not damaged in any way.
$e Be sure to put the blade guard and the shoulder band on the machine.
(2) Working site inspections
$` Use the machine after making sure there are no cans, wires or pebbles in the work area.
$a Specify an area within a 15m radius from the operator as a dangerous area. Warn people by surrounding the area
with a rope and putting up a notice. Prevent people and pets from entering the area.
If a person or a pet approaches within a 15m distance, immediately stop the engine.
If two people or more work together with the machines, work 15m apart from each other.
(3) Working time
$` Work 2 hours or less a day.
$a Fatigue is the biggest factor in accidents. Take a 10-20 minute rest for every 30-40 minutes of work.
ÿ- i ni m um
ÿ ÿ ÿM
3
Workers in a state forest take rests for safety as follows.
The maximum consecutive working days are 3 days.
Maximum consecutive working time:
30 minutes
Maximum working hours a day:
2 hours
ÿ- i ni m um
ÿ ÿ ÿM
(4) Starting the Engine
$` Check the area within a 15m radius before starting the engine. Do not let the blade touch the ground, stones or branches.
$a Do not start the engine inside a building.
$b When starting the engine, be sure to move the engine 3m or more away from the refueling place.
$c Be careful not to breathe exhaust fumes.
3. During operation:
10, 000r . p. m .
(1) Operating
$` Leave plenty of time for mowing. Do not use the machine when raining or after rain. It is dangerous because the
ground is slippery.
Be careful in slippery places i.e. snow or ice. Always secure a safe foothold.
$a Do not move the brush cutter with excessive force. Work in a proper and balanced posture.
$b Follow the manufacturer's recommended engine revolution speed. Only change speed when a change is needed.
$c When there is any sign of danger, immediately stop the engine or move the brush cutter away from the operator,
i.c. remove the shoulder band.
$d When the cutter touches a hand object, such as a stone, immediately stop the engine and make sure that there are
no abnormalities on the blade surface. If there is an abnormality, stop working and replace the blade.
$e When grass coils around the blade and the engine slows down, be sure to turn off the engine before removing the grass.
$f Operate the blade by sweeping it from right to left.
$g Do not use the brush cutter for purposes other than mowing. Do not cut water or soil.
$h Be sure to use the brush cutter parts specified by the manufacturer.
$i Be sure to put the blade guard on the machine before working. Never remove the blade guard, because it is
dangerous to work without the guard.
$j When the engine revolves, the machine may move in a opposite direction due to torque.
Firmly grip the handle to counteract this.
$k When two or more people work together, decide on a signal, such as a whistle, in advance. Always observe the signal.
Keep 15m apart from each other.
$l Never talk with another person while working. If you need to take, stop the engine first.
$m Do not touch the spark plug cap or the high – voltage cable. There is a possibility of receiving an electric shock.
$n To prevent burns, do not touch the engine or muffler during operation. After stopping the engine wait until the
engine has cooled down.
$o Be sure to stop the engine before moving to another work site, putting the brush cutter on the ground or stopping work.
Do not place the machine near flammable material, such as dead grass, because the muffler is still hot after
the engine stops and may ignite it.
0ûTo remove the machine in an emergency, press the joint on the shoulder band.
0ûIn an emergency, such as an injury, let others know by shouting in a loud voice.
0ûBe sure to stop the engine and put the blade cover on the machine after stopping mowing or before moving it to
another site.
$p If the bush cutter experiences any trouble, refer to the troubleshooting instructions in the manual. If the manual
instructions do not work, consult the store where you bought the machine.
CAUTION:
An uncontrolled brush cutter can cause serious injury or death of not only the operator but also a third
party. Use the machine very carefully.
(2) Attire
$` Wear comfortable clothing.
$a Wear gloves during operation.
$b Wear a cap or helmet.
$c Wear dust – proof glasses to protect the eyes.
$d Use proper protective accessories (i.e. earplugs) to protect the ears.
$e Wear safety shoes.
Maximum working days a week:
5 days
Maximum working hours a month:
40 hours
ÿ- i ni m um
ÿ ÿ ÿM
4