DSC PC3000 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Система безпеки DSC PC3000. DSC PC3000 15 сторінок.
Також для DSC PC3000: Інструкція з експлуатації (15 сторінок)
Друкувати сторінку
Master Code
The 4 digit Master Code is used for arming and disarming the system, for
programming additional access codes, and for changing other features. The
Master Code will be supplied to you by your installer. All keypad entries are made
by pressing one key at a time and may be changed by you at any time if the installer
selects an option. For additional access codes, see Programming Additional
Access Codes.
Arming
Close all protected doors and windows and stop movement in areas covered by
motion detectors. If the "Bypass" light is ON, be sure zones are being intentionally
bypassed before arming the system (see Zone Bypassing).
Check to see that the "Ready" light is ON (all zones are closed). The system cannot
be armed unless the "Ready" light is ON. Enter a [4 digit access code]. As each
digit is entered, the keypad sounder will beep. Once the correct access code is
entered, the "Armed" light will come ON and the keypad sounder will beep quickly.
If the access code was entered incorrectly or the "Ready" light was not ON, the
keypad sounder will beep steadily for 2 seconds.
When the correct code is entered and the system is armed, exit through the door
indicated by your installer as the exit-entry door. The exit time may be changed by
your installer (please refer to the Quick-Arm feature).
Auto-Bypass Option - Home-Away Arming
This feature, if selected by your installer, will allow you to arm your system with any
valid access code and the system will automatically bypass the interior zones if
those interior zones have been designated as home-away zones by the installer.
When activated, the "Bypass" light will come ON. If you exit within the allowed exit
time, the system will automatically reactivate the interior zones. This feature is
designed to save the user from having to manually bypass interior zones each time
they wish to arm the system and remain at home.
In residential applications where the system has been armed and the interior zones
are automatically bypassed, the interior zones can be reactivated from a keypad
outside the interior zones protection area (e.g. a bedroom). To reactivate the interior
*
zones, press [
Entry Delay Off Arming
If you wish to arm your system and eliminate the entry delay, enter [
your access code. The "Armed" light will flash as a reminder that the system is
armed and has no entry delay. An entry through any zone programmed as a delay
zone will create an instant alarm.
] then [1] and the "Bypass" light will go out.
*
],[9] before