DAITEM 171-21X Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу для Датчики безпеки DAITEM 171-21X. DAITEM 171-21X 18 сторінок. Infared motion detector
Також для DAITEM 171-21X: Посібник з монтажу (8 сторінок)
Друкувати сторінкуGB
Summary
1. Introduction.............................. 72
2. Preparation .............................. 74
2.1 Opening the detector ......... 74
2.2 Power supply ...................... 74
3. Programming........................... 75
4. Configuration........................... 76
5. Installing the detector............. 78
5.1 Choosing the best place .... 78
5.2 Fixing method ..................... 79
the detector......................... 81
6. Maintenance ............................ 83
6.1 Battery low indication ......... 83
6.2 Changing the battery.......... 83
7. Technical data.......................... 84
Recommendations
The user must not attempt to access the siren's internal parts, except areas described in this manual. If the user
does access these parts, the product guarantee will be considered null and void and DAITEM shall not be held
responsible for any problems. Touching the siren's internal parts and/or electronic components can damage the
product. Furthermore, the siren is designed in such a way that these parts and components do not need to be
accessed for operation or maintenance purposes.
1. Introduction
IMPORTANT
• Some functions are only available with versions 2.0.0 or later
(press
the version).
• The operating differences with former ranges are described in the
compatibility booklet available in the Daitem installers section at
www.daitem.co.uk.
The infrared detector is used for protection inside buildings.
Intruders are detected when the infrared radiation associated with
movement varies.
72
on the control panel keypad to check