DSC PowerSeries Self Contained Wireless Alarm System Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки DSC PowerSeries Self Contained Wireless Alarm System. DSC PowerSeries Self Contained Wireless Alarm System 20 сторінок. Self-contained wireless alarm system v1.0

DSC PowerSeries Self Contained Wireless Alarm System Посібник користувача
Controls & Indicators
IMPORTANT NOTICE
A security system cannot prevent emergencies. It is only intended to alert you and – if included – your
central station of an emergency situation. Security systems are generally very reliable but they may
not work under all conditions and they are not a substitute for prudent security practices or life and
property insurance. Your security system should be installed and serviced by qualified security profes-
sionals who should instruct you on the level of protection that has been provided and on system
operations.

Language Selection

Your system can display messages in different languages.
1. Press and hold both
keys simultaneously.
2. Using the
keys, scroll through the available languages.
3. Press
to select your desired language.
Arming & Disarming the System

Stay Arming

Stay arming will bypass the interior protection (i.e. motion sensors) and arm the perimeter of the sys-
tem (i.e. doors and windows). Close all sensors (i.e. stop motion and close doors). The Ready ( )
indicator should be on.
Press and hold the Stay key for 2 seconds and/or enter your Access Code and do not leave the pre-
mises. During the setting state (exit delay active), the Armed ( ) and Ready ( ) indicators will light.
When the exit delay is completed, the alarm system is armed/set and this is indicated on the keypad
as follows: the Ready ( ) indicator will turn off, the Armed ( ) indicator will remain on.
The Armed (
) indicator and a bypass message will be displayed. The system will automatically
bypass certain interior sensors (i.e. motion sensors).
NOTE: For SIA FAR listed panels, the Stay Arming Exit Delay will be twice as long as the Away
Arming Exit Delay.
NOTE: If your system is installed in accordance with SIA CP-01 Standard for False Alarm
Reduction then the security system will arm in the Stay Armed mode if the exit delay time expires
and no exit has been made.
2