DSC SCW9045-868 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки DSC SCW9045-868. DSC SCW9045-868 20 сторінок. Self contained wireless
Також для DSC SCW9045-868: Посібник користувача (20 сторінок)

DSC SCW9045-868 Посібник користувача

Bell Squawk Attribute

This attribute is used to determine whether an access code should generate an arming/disarming Bell
Squawk upon entry of the code for Away arming. The Wireless Keys with access codes associated
with them may generate Arming/Disarming Bell squawks. Contact your installer to have this
programmed.
NOTE: The Master Code cannot use the Bell Squawk attribute, but is required to enable it for other
codes.
NOTE: This feature cannot prevent the Arm/Disarming squawks from being generated if an access
code assigned to a WLS Key is manually entered at a keypad.

Erasing an Access Code

To erase a code, select the code and enter
delete the code immediately and the user will be returned to select another code.

User Function Commands

First disarm the system then enter
The
command is used to gain access to the following list of Master functions of the system.
[1] Time and Date
Enter 4 digits for 24 Hour System Time (HH-MM). Valid entries are 00-23 for the hour and 00-59 for
minutes. Enter 6 digits for the Month, Day and Year (MM-DD-YY)
[2]-[3] Future Use
[4] System Test
The system's Bell Output - 4 seconds (2 seconds medium volume, 2 seconds high volume ), Keypad
Lights, Back up Battery Pack and Communicator are tested.
[5] Enable DLS / Allow Remote System Service
If enabled, the installer will be able to access Installer Programming remotely using DLS (Downloading
Software). This function provides a window for telephone ring detection by the alarm system. The DLS
window will remain open for 6hrs, during which time the installer will be able to enter DLS an unlimited
number of times. After the 6-hr. window has expired, access to programming via DLS will be unavailable
until the window is re-opened.
[6] User Call-up
If enabled by the Installer, the panel will make 1 attempt to call the downloading computer. The
downloading computer must be waiting for the panel to call before downloading can be performed.
[7] For Future Use
[8] User Walk Test
Allows the user to enter the Walk Test mode. See Walk Test on page 9.

Changing Brightness/Contrast

When this option is selected, the keypad will allow you to scroll through 4 brightness levels and 10
contrast levels.
1. Press
[Master code].
2. Use the
3. Press
to select the setting you want to adjust.
4. a) 'Brightness Control': There are 4 backlighting levels. Use the
level.
b) 'Contrast Control': There are 10 different display contrast levels. Use the
to the desired contrast level.
5. To exit, press

Changing the Buzzer Level

When this option is selected, the keypad will allow you to scroll through 21 different buzzer levels. A
level of 00 disables the buzzer.
1. Press
[Master Code].
[Master Code]
keys to scroll to either Brightness Control or Contrast Control.
.
as the first digit. If
8
is entered, the system will
keys to scroll to the desired
keys to scroll