Anslut 412-018 Інструкція користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Інструкція користувача для Вентилятор Anslut 412-018. Anslut 412-018 16 сторінок. Table fan
Друкувати сторінку
EN
1.
Place the foot into the base plate (16) and tighten the base nut (17).
2.
Position the rear grille (9) on the motor shaft (10) and lock with the nut (8).
3.
Fit the fan blade (7) on the motor shaft (10) and lock with the fan blade nut (6).
4.
Position the front grille (2) against the rear grille (9), align and lock the clamp (3, 4) and
tighten the fastening screw (5).
NOTE: Switch off the tool, unplug the power cord and wait until all moving parts have completely
stopped before cleaning.
• Clean the appliance with a soft cloth dampened with a mild detergent.
• Never immerse the appliance in water or any other liquid.
• Clean the appliance before storing and store it dry in its box or other suitable packaging.
• If necessary, dismantle the appliance by following the assembly instructions in the reverse order.
16