Anslut 006114 Оригінальна інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Зовнішнє освітлення Anslut 006114. Anslut 006114 7 сторінок. Wall spotlight
Друкувати сторінку
SAFETY INSTRUCTIONS
•
Only intended for outdoor use.
•
The LED light source is not replaceable.
When the light source has reached the
end of its useful life the complete light
must be replaced.
•
The electrical installation must comply
with local regulations. Consult an
authorised electrician if in doubt.
•
Always follow the electrical specifications
on the product labelling.
•
Always switch off the power supply before
installation, connection and service.
•
Never modify the light, this could result in
serious personal injury and will invalidate
the warranty.
•
The light must be connected to an
earthed power supply on installation.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
TECHNICAL DATA
Rated voltage
Output
Luminous flux
Colour temperature
Life span
On/Off
Energy class
Protection rating
Diffusion angle
230 V ~ 50 Hz
10 W
2 x 370 lm
3000 K
15000 h
15000 times
A+
IP44
97°
INSTALLATION
FIG. 1
FIG. 2
FIG. 3
FIG. 4
FIG. 5
FIG. 6
IMPORTANT:
•
Always disconnect the power supply
before installation.
•
The light is for wall mounting.
MAINTENANCE
1.
Switch off the power supply to the light.
2.
Wipe the light with a dry or slightly damp
cloth.
3.
Wait until the light is completely dry before
switching the power supply on again.
NOTE:
Do not use detergents, alcohol, solvents or
the equivalent to clean.
EN
7