Anslut 422-075 Інструкція з експлуатації Посібник з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Ліхтар Anslut 422-075. Anslut 422-075 11 сторінок. Post lantern

Друкувати сторінку

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

• New installations and

extensions to existing

systems must always be

performed by a qualified

electrician.

• If you have the necessary

experience and knowledge,

you may replace switches

and wall sockets, fit plugs,

extension cords and lamp

holders. If not, you should

contact an electrician.

Improper installation may

result in electric shock or fire.

• Check that the power supply

is disconnected before

installation and servicing.

• When the lamp is switched

on, the temperature in the

bulb gradually increases. Do

not touch the bulb when it is

on or has been switched off

but not cooled sufficiently.

• Switch off the lamp and wait

until it has cooled before you

replace it.

• The bulb output must never

exceed the stated output.

• If the glass in the lamp shade

is damaged, it must be

replaced as soon as possible.

Do not use the lamp if the

lamp shade is broken.

• Do not look directly at a bulb

that is switched on.

• Make sure the lamp is

properly earthed.

• Use power supply cables that

are at least 1 mm², type

H05RN-F.

• Connect the cables to the

double pole switch.

TECHNICAL DATA

Mains voltage

Protection rating

Safety class

Base

Output

DESCRIPTION

A. Triangular support

B. Anchor rod

D. Base

E. Lower lamp post

F. Plastic expander

G. Sleeve

H. Upper lamp post

I. Adapter

J. Lamp

K. Post head

L1. Terminal block

L2. Terminal block IP44

230 V ~ 50 Hz

IP44

E27

3 x 60 W