Foxfury Lighting Solutions NOMAD T56 Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Світильник Foxfury Lighting Solutions NOMAD T56. Foxfury Lighting Solutions NOMAD T56 20 сторінок.
Також для Foxfury Lighting Solutions NOMAD T56: Посібник із швидкого старту (6 сторінок)
Друкувати сторінку
BATTERY LIFE
MODE
HIGH POWER
MEDIUM POWER
LOW POWER
FLASHING
*Battery life may vary according to age and ambient conditions.
**Flashing Mode not available on the Nomad® T32 & T56.
BATTERY LIFE INDICATOR
COLOR
GREEN
ORANGE
RED (FLASHING)
USING THE NOMAD
The Nomad
can run continuously by plugging it into a power source.
®
1.
Start with the AC Cable. Connect it to the AC-DC Adaptor.
2.
Then, plug the Barrel Connector (part of the AC-DC Adaptor) into the
Charging Port of the Nomad
3.
Press the Power/Mode Switch. The light will then turn ON.
The Nomad
System. If it is plugged in and the Nomad
being charged.
As long as the unit is plugged into a power source, (even if it has a
very low power) the light can be turned ON.
Input voltage: 11–17VDC. Do NOT exceed!
NOTE: The Nomad
BATTERY
LIFE
3 hrs
9 hrs
24 hrs
10 hrs
DESCRIPTION
FULL BATTERY
CAUTION — BATTERY IS GETTING LOW
CHARGE IMMEDIATEL Y
WHILE PLUGGED IN
®
.
®
must be turned OFF in order to charge the Battery
®
will NOT accept a 24VDC input.
®
360
LUMENS
LUMENS
7,000
2,100
700
7,000
(FOR LOCATION, PLEASE REFERENCE PAGE 3)
is ON, the battery is NOT
®
T32
T56
LUMENS
7,000
8,200
2,800
3,200
800
900
N/A
N/A
7