DSC PC5928 Посібник із швидкого старту - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Блок управління DSC PC5928. DSC PC5928 16 сторінок. Audio interface module
Також для DSC PC5928: Інструкція користувача (2 сторінок)

Друкувати сторінку

3.1

Paging

The PC5928 Audio Interface module allows Paging to be performed.

Only one Page can be performed at a time. If a conversation is already estab-

lished another Page cannot be performed until the existing conversation is over.

To initiate a Page press the Page/Answer button on any station. The station will give a

double beep. If no beeps are heard it is because another conversation is already taking

place. If the Page is valid all other stations that are not on 'Do Not Disturb' will sound a rapid

beep. The person performing the Page can now be heard on all the stations.

To answer the Page a user must press the Page/Answer button on another station. The station

will beep twice at which point the audio channel is dedicated to the person who initiated the

Page and the person who answered. No other station will transmit the conversation.

The PC5928 auto detects the source of the loudest voice and uses this to control

the direction of conversation.

To end a Page either person can press the Page/Answer button. If no voice is heard for 30

seconds the conversation will be automatically terminated by the PC5928.

3.2

Page Listens To All

The system can be configured so that when a page is initiated from an intercom station, all

other intercom stations can respond without pressing the Page/Answer button (excluding

ports in DND or masked off in the General Broadcast options). If the page is answered on

another intercom station, general page activity will take place. If the page is not answered

within 30 seconds, it will time out.

3.3

Cancelling a Page

If a Page is initiated by accident, pressing the Page/Answer button a second time will cancel the Page.

3.4

Do Not Disturb

To avoid receiving pages, doorbox calls or incoming phone calls a station can be put on 'Do

Not Disturb'. To do this press the Do Not Disturb button on the station. The red light on the

station will come on solid to indicate the unit is in Do Not Disturb mode.

To take a station off Do Not Disturb press the Do Not Disturb button again. The red light on

the station will go out.

3.5

Door Answer

Exterior stations can be programmed as doorbox 1 or doorbox 2 for doorbell operation. Two

options are available as the system will chime differently for both. doorbox 1 will cause a

'ding dong' sound while doorbox 2 will cause a 'dong' sound.

When the button is pressed on any station programmed as doorbox 1 or doorbox 2 all

stations not on Do Not Disturb will sound the tone.

To answer the doorbell a user can press the Page/Answer button on any station. Once

pressed the audio channel will operate the same as it does for a Page.

If a Page is in progress when a doorbell is pressed the two persons on the Page will hear the

tone. To answer the doorbell either person can press the Page/Answer button. The Page will

end and the user will immediately be connected to the doorbell station.

3.6

Doorbell Listens To All

The system can be configured so that when a page is initiated from a doorbell station, all intercom

stations can respond without pressing the Page/Answer button (excluding ports in DND or masked

off in the General Broadcast options). If the doorbell page is answered on an intercom station,

general page activity will take place. If the page is not answered within 30 seconds, it will time out.

To end a page with a doorbell, press and release the Page/Answer button on the intercom station.

Audio Functions

firealarmresources.com