Foxpro Inferno Інструкція з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мисливське спорядження Foxpro Inferno. Foxpro Inferno 12 сторінок.
Друкувати сторінку
Auxiliary Jack Function
The Inferno is equipped with an auxiliary jack labeled "AUX". The purpose of this jack is to allow for the
connection of certain external devices, such as the FOXPRO
to turn these on and off with the Inferno transmitter. However, there are some strict electrical limits
involved with this jack. If these limits are exceeded, damage to your Inferno will result. This damage is not
covered by the warranty. The electrically inclined will want to know that the jack is connected to the drain
of an internal Field Effect Transistor with a maximum current rating of 100mA. The "tip" polarity of the
3.5mm jack is positive, while the sleeve is negative. If the external device is connected with the polarity
reversed, an internal protection diode within the FET will conduct, causing the device to stay on constantly.
The maximum voltage applied to this jack must never exceed 15 volts. Typical uses for this jack would be to
®
control the FOXPRO
Jack-in-the-Box or Jack-Attack Decoy, or to start and stop a video recorder.
Instructions on connecting various devices to the "AUX" jack are beyond the scope of this manual. You are
urged to seek help from a knowledgeable professional before connecting any unapproved device to this
jack. Remember that damage to your Inferno caused by improper use of the "AUX" jack is not covered by
the warranty, nor will FOXPRO
Using External Speakers
The Inferno is equipped with an external speaker jack which allows you to connect an additional speaker. By
connecting a larger and more efficient external speaker to the Inferno, the volume level can be increased
significantly. You can find a complete selection of external speakers to purchase on the FOXPRO website.
The external speaker jack on your Inferno accepts a standard 3.5mm plug. When selecting an external
speaker, it is recommended to use one with an impedance rating of 8-ohms. NOTE: Be sure the Inferno is
turned OFF before connecting an external speaker! To connect an external speaker, plug the connector of
the external speaker into the external speaker jack on the side of the Inferno. If you wish to have ONLY the
external speaker produce sound, you must disable the internal speaker by moving the speaker switch to the
left or off position.
Inferno Transmitter Detailed Information
5-1 Primary Display Area
When the Inferno transmitter is powered on,
it will display a startup screen showing the
firmware version information and then the
primary display area (shown to the right). The
top line of the transmitter displays
"Categories." The first line down displays
"Favorites/Presets." "Favorites/Presets"
provides a mechanism for both creating new
presets as well as initiating playback of
existing presets. The transmitter can handle
up to 10 presets in total. Beneath
"Favorites/Presets" is the list of sound
categories or "Sound List" depending upon
the transmitter configuration. The bottom line of the transmitter display is a static status line displaying (in
order): mute status, volume level, FOXBANG status, battery level, and elapsed timer. To navigate through
the primary display area and menu options, use the "Scroll Up" or "Scroll Down" buttons. The resulting
action of pushing the "Scroll Up" or "Scroll Down" button is the black highlight bar moving up or down,
respectively. To select a menu item, push the Select button. To move back through the menu, or exit a
category or menu option, use the back/menu button.
5-2 Main Menu
The main menu provides access to a variety of transmitter configurations. To access the main menu, push
the "Back/Menu" button.
6
®
be liable for damage to any device connected to this jack.
®
FOXJACK 2 or Jack Daddy decoy, and to be able
Figure 1: Primary Display Area