DSC PowerSeries Короткий опис продукту - Сторінка 6

Переглянути онлайн або завантажити pdf Короткий опис продукту для Блок управління DSC PowerSeries. DSC PowerSeries 20 сторінок. Telephone interface & automation control module
Також для DSC PowerSeries: Посібник користувача (20 сторінок)

Друкувати сторінку

Step 3 – Press [2] for Occupancy Setting Setting

The Escort will announce the present Occupancy Setting. Press the [1] key until the desired Occupancy

Setting is announced, then press the [#] key to save and exit.

Step 4 – Press [1] to Set the Temperature

The Escort will announce:

Step 5 – Press [1] to Set the Cool Temperature

The Escort will ask you to enter a two-digit number for the new Cool Temperature set point. After it is

entered, the Escort will read back the new temperature set point.

Step 6 – Press [2] to Set the Heat Temperature

The Escort will ask you to enter a two-digit number for the new Heat Temperature set point. After it is

entered, the Escort will read back the new temperature set point.

Continue these steps to program the temperature set points for all the different Occupancy Settings being

used.

'Cool Temperature is XX Degrees'

'Heat Temperature is XX Degrees'

'To change Cool Temperature, press [1]'

'To change Heat Temperature, press [2]'