Foxpro Patriot Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мисливське спорядження Foxpro Patriot. Foxpro Patriot 17 сторінок.

2-5 Favorites

The TX433 allows you to establish a list consisting of 10 of your most frequently used sounds under the

"Favorites" menu. These "Favorites" allow for quick selection of your favorite sounds at your

predetermined volume level. This section describes the process involved in creating, changing, and using

your presets.

Creating New Favorites

Select the "Favorites" menu item on the TX433. If this is your first time working with favorites,

favorite 1 is automatically set to Coyote Pup Distress 3 at volume 10.

To set a preset, position the black highlight bar on one of the blank preset slots and push the

"Select" button a single time.

The first step is selecting the sound you wish to use. Use "Sound Up" or "Sound Down" buttons

to navigate through your sound list and locate the desired sound. Once found, push the "Select"

button to set the sound.

Next, select the volume level that you wish to use for this favorite. This is done by using the

"Volume Up" or "Volume Down" arrow button. After you have found your desired volume level,

push the "Select" button to set the volume level. This will complete setting up your Favorite.

You will notice that the slot you assigned this favorite to now displays the sound name and the

volume level for reference.

Changing/Overwriting Existing Favorite

Select the "Favorites" menu item on the TX433.

Position the highlight bar on the favorite that you wish to change.

Push and hold the "Select" button for about 3-4 seconds. Repeat the steps for Creating a New

Favorite.

Using a Favorite

Select the "Favorites" menu item on the TX433.

Position the highlight bar on the preset that you wish to activate.

Push the "Select" button a single time to begin playback. The Patriot will begin playing the

selected sound at the preset volume level.

The AUX jack is provided primarily for the remote control of FOXPRO decoys, and may be suitable for

controlling other similar devices. It is NOT intended for the direct control of motors, flashlights, or other

devices requiring the internal AUX jack circuitry to switch more than 50 milliamps. The jack tip polarity is

positive. Do not exceed 15 volts. You are urged to seek help from a knowledgeable professional before

connecting any unapproved device to the jack. Keep in mind that any damage to the FOXPRO caller as a

result of improper use of the AUX jack is not covered by the warranty, nor will FOXPRO be liable for damage

to any connected devices.

The Patriot is equipped with an external speaker jack which allows you to connect an additional speaker. By

connecting a larger and more efficient external speaker to the Patriot, the volume level can be increased

significantly. You can find a complete selection of external speakers on the FOXPRO website. The external

speaker jack on your Patriot accepts a standard 3.5mm plug. When selecting an external speaker, be sure to

use one with an impedance rating of 8-ohms. Be sure the Patriot is turned OFF before connecting an

external speaker! To connect an external speaker, plug the connector of the external speaker into the

external speaker jack on the side of the Patriot. If you wish to have ONLY the external speaker produce

sound, you must disable the internal speaker by moving the speaker switch to the left, or off position.