DSE RE-TCC5L Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження DSE RE-TCC5L. DSE RE-TCC5L 3 сторінки. Color wired cameras
Друкувати сторінкуOWNER'S MANUAL
The camera is equipped with a programming menu screen for advanced features. Press the
button in the center between the arrows to display the on-screen menu.
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
•
To move around the menu, use the arrow keys and press the center button to the ENTER
function •
function •
•
LENS - in this section must indicate that goal is being used with the camera so that the
same can properly control
•
MANUAL: lens fixed lens
•
DC: DC drive auto iris lens (adjustable brightness)
•
VIDEO: not available on this model EXPOSURE - General image settings. It
contains the following functions:
•
SHUTTER: This option allows you to set how
operation of the diaphragm. The
shutter is an electronic circuit which decides how often read the charge of pixels of the
CCD, the electronic shutter circuit follows
environment and accelerates
with increasing brightness, so as to avoid that the pixels being overexposed to the light and
the camera gives un'immgine bleached. You can choose between different values i ncluding:
auto (automatic), 1/50, 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000 (pixels
second), FLK (flickerless, which is the compensation of the images that contain variations
the human eye as a neon light or an analog display), x256, x128, x64, x32, x16, x8, x4, x2
(the shutter speed)
•
BRIGHTNESS: To
image (adjustable from 0 to 100)
•
AGC: is the automatic gain control and serves to improve vision in low light
conditions, but tends to create unnatural images because of the effect of amplification. You
can choose from several options (off, low, middle, high)
•
SENSE UP: DSS - Digital Slow Shutter - used for shooting very dark conditions
without using illuminators. The condensate camera more frames summing the brightness is
allowing recovery even where
the human eye would not see
absolutely nothing. More increases the more integration reduces the number of frames and
the image looks jerky and jerky. Setting this car you can choose between different values
r anging from x2 to x256.
•
BLC: for backlit shots of subjects in areas with bright background such as a window
or an external port which eventually only provide the outline of a black figure that stands out
against the bright background. The intervention of the BLC serves to bring to light the
foreground subject. You can choose from several options: OFF - BLC - HSBLC (glare of car
headlights useful for night shots of the vehicles).
•
D-WDR: Wide Dynamic Range Digital - is used to shoot subjects
bright. Compared to the above mentioned BLC This function allows you to make the dark
subject visible
•
•
•
•
•
• •
•
• •
•
• •
•
• •
•
• •
•
•
•
•
brightness
there
the frequency of
reading
invisible
regular
brightness
there
backlit background
econtemporaneamente the bright background. You can choose between INDOOR for
OUTDOOR for remotes, OFF to deactivate the function.
•
RETURN: return back to the menu (RET) or out of it completely (END). WHITE
BAL - in this section there are the options for white balance, an important feature to make the
white color of the image that always in all types of lighting. Options: ATW (Auto Tracking) -
AWB - AWC set - MANUAL -Indoor - OUTDOOR) are available. In the option MANUAL
adjusting the shades of white manually if
preconfigured do not give satisfactory result.
DAY NIGHT - allows you to choose between several options for
night vision. E 'can set the camera so as to constantly provide color image (COLOR),
always in B / W or switch to B / W colors automatically according to light). In the latter case it is
possible to set the thresholds of passage and a possible delay. In the B / W mode, the camera
can be combined with additional infrared illuminators.
3DNR - 3D Digital Noise Reduction is a digital video noise reduction function. Thanks to this
feature, especially useful with little brightness, it cleans the video signal from the noise and you
get a greater uniformity of color.
SPECIAL - contains the following functions:
•
CAM TITLE: allows you to give a name to the camera that appears superimposed.
•
D-EFFECT: set specific image readouts processed in digital. Available function:
FREEZER (blocks the image), MIRROR (mirror function, also allows you to flip the image
upside down with the V- function FLIP), D-ZOOM (digital zoom), GAMMA (values f rom
0.05 to 1.00), NEG IMAGE (displays the image in negative).
to the
•
RS485: not used
•
MOTION: the camera is used to indicate any variations in video image resulting
from an intrusion. The AREA SELECT sections, AREA DISPLAY, LEFT / RIGHT WIDTH,
allow you to set the area where you want to detect an intrusion.
The SENSITIVITY function sets the sensitivity to changes of image (intrusion). The value
ranges from 0 to
40, plus the value is higher, the detection is sensitive. Motion detection of this camera is
designed to highlight the on-screen box that is an ongoing movement to attract the gaze of
those who is looking at more than one camera monitor.
•
PRIVACY: This feature allows you to set masking areas to make non-visible areas
(masks privacy) that you want to exclude from monitoring for the need to protect privacy.
Once activated this function (ON), opens a menu screen that is used to set the size and
appearance of privacy masks (SELECT AREA, AREA DISPLAY,
HEIGHT, COLOR RETURN). You can set 8 masking areas.
•
SYNC:
internal synchronization.
•
LANGUAGE: allows you to set the menu language. International Option ENGLISH.
•
RETURN: return back to the menu (RET) or out of it completely (END). ADJUST -
This function can be used to adjust the parameters
video image.
SHARPNESS (SHARPNESS: set a value from 0 to 31),
Document: RE-TCC5L 1M0
Document: RE-TCC5L 1M0
Update: November 2010
Update: November 2010
RE-TCC5L Color Wired cameras
shooting inside,
the
TOP / BOTTOM,
LEFT / RIGHT WIDTH,
not
used.
Available
the options
Page: 2
Page: 2
other
options
HEIGHT,
TOP / BOTTOM,
only
I'm