DSE DSE705 Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Контролер DSE DSE705. DSE DSE705 13 сторінок. Ats control module
Друкувати сторінку
4 CONFIGURATION TABLES
Function
Start Delay
Used to give a delay between mains failure and starting the engine. Used to prevent the generating from starting on
brown outs (dips) or short mains outages.
Mains Return Delay
Used to give a delay between the mains returning and the system switching the load back to the mains. Used to ensure
that the mains is steady before this action is executed.
Warm Up Timer
Delay between the engine being available for use, and the closure of the generator load-switching device to allow time
for the engine to warm before being loaded.
Cooling Timer
Delay between opening the generator load-switching device and stopping the engine to allow time for the engine to
cool down before being stopped. This is particularly useful when used in conjunction with turbo-charged engines.
Remote Start Input
Type
Programmable input can be configured to one of the following.
♦
Remote start – If the input is active the generator will be started, and stopped if the input is deactive. Mains fail is
allways active.
♦
Simulated mains – If the input is active the generator will not start in the event of a mains failure. E.G. if the
generator is supporting a non 24 hour operation, a 24 hour timer can be used to prevent a mains failure from
starting the generator and taking load.
705 ATS controller operators manual
FUNCTIONS AND CONFIGURATION TABLE
057-043 705 Operating Instructions Issue 1.1 18/06/2007
Value (Default in Bold)
0 Seconds
5 Seconds
10 Seconds
15 Seconds
20 Seconds
30 Seconds
60 Seconds
180 Seconds
0 Seconds
5 Seconds
10 Seconds
15 Seconds
20 Seconds
30 Seconds
60 Seconds
180 Seconds
0 Seconds
5 Seconds
10 Seconds
15 Seconds
20 Seconds
30 Seconds
60 Seconds
180 Seconds
0 Seconds
5 Seconds
10 Seconds
15 Seconds
20 Seconds
30 Seconds
60 Seconds
180 Seconds
Remote Start
Simulate Mains
JR
- 7 -