DSE G1680 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для ВІДЕОРЕЄСТРАТОР DSE G1680. DSE G1680 17 сторінок.

Put the batteries into the remote control. Make sure the (+) and (-) signs on the batteries agree with

the (+) and (-) signs in the battery compartment.

Setting up your video (Option 1) - Connecting your video through RF lead

Before you start, unplug all the equipment from the mains supply.

Television

AC~240V, 50Hz

This lead is supplied in your accessory kit.

If you have connected your video as shown in option 1, turn to page 6.

Aerial

The type of aerial you should use, depends on local interference and how far you are from

the transmitter. You should contact a local retailer if you have any questions about your

aerial.

Back view of your VCR

Setting up your video (Option 2) - Connecting your video through RCA lead

Switch off all components when connecting or disconnecting cables.

AC~240V, 50Hz

Unplug the aerial cable from your TV and plug it into the "ANT. IN" socket of the

video.

Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and

the aerial socket of the TV.

Plug a RCA cable into the "RCA" socket of the video and the AV socket on the TV

if available.

This connection will provide best picture and sound quality.

Ask your dealer for an appropriate cable if you do not have one.

Without a RCA cable, you need to follow the steps described under "If you are not

using a RCA cable" (See page 4)

Make sure the rating of the household mains supply matches the rating shown

on the back of the video.

Now plug in the mains lead. The display of the video should now light.