ATSS ACTIVE 108 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки ATSS ACTIVE 108. ATSS ACTIVE 108 10 сторінок.

USER MANUAL

How

To change Modes,

First place the key in OFF position.

Then place switch to the mode which you want. (You will

hear a beep sound while changing)

Now change the key position to ON, to Arm the system in

mode which you kept.

Important Note: While system is in ON state you

can't change modes.

Arming the

To Arm the Zones place key in ON position and remove it.

Arming the system in

Place the switch in Day mode and ON the system; you will

hear a double beep sound which conﬁrms Activation of

day mode.

In Day mode Zone 1 and Zone 2 will be in Deactive state.

Panic and Tamper switch will be Active.

Arming the system in

Place the switch in night mode and ON the system; you

will hear a double beep sound which conﬁrms Activation of

Night mode.

Zone 2 will be Activated immediately and the

corresponding LED will glow in RED.

Zone 1 will take a delay time of 1 minute to Activate. Once

it is Activated the corresponding LED will start glowing

...to change modes?

...system

...day mode

...night mode

ACTIVE 1O8