ATTA Freedom Fill Посібник з усунення несправностей - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з усунення несправностей для Автомобільні аксесуари ATTA Freedom Fill. ATTA Freedom Fill 5 сторінок. Auxiliary system
Також для ATTA Freedom Fill: Інструкція з монтажу (10 сторінок)
Друкувати сторінкуDODGE
98-09, 11 DODGE 10 08 + ALT 88-99 12 04-11 98-03
EMPTY
6.50
1/4
5.00
1/2
4.00
3/4
2.50
7/8
1.83
FULL
1.00
Voltage correct?
•
YES: Go to #4
•
NO:Check the connection at the blue wire and the sending unit wire
4. Certain year models of trucks have different programs for the Computer module. Make
sure you have the correct box to the truck. If you are not sure, please call us
3047
with your computer module serial number.
1. Make sure the switch for the Freedom Fill System is on the "ON" position.
o
Does the light on the switch turn on?
o
YES: Go to #3
o
NO: Go to #2
2. Check to ensure you have a proper 12 volt ignition power source on the brown wire to the
computer module and to the positive wire at the fuel pump.
o
Power source good?
o
YES: Go to #3
o
NO: Replace RED wire to a 12V Ignition power source. See Freedom Fill
Auxiliary Systems Instructions.
3. Check the Chassis ground or green wire at the Freedom Fill Computer module.
4. Make sure you are on the correct factory sending unit with a good connection with the
blue wire from the Freedom Fill Auxiliary System wiring harness.
o
Purple-04-14 GM/Chevrolet
o
Blue w/ Purple Strip 2015+ Gm/Chevrolet
o
Yellow with purple stripe-2008-current Ford
o
Yellow with white stripe 88 to 07 Ford front tank
o
Blue with black stripe 03 to 05 Dodge
o
Blue with white stripe-98-02 & 06-Current Dodge)
(See owner's manual due to variations of truck wiring).
o
Approximate Voltages
FORD
-
5.00
0.60
-
3.50
1.00
1.63
2.50
1.65
-
1.50
2.25
0.83
1.13
2.55
-
0.75
2.75
Pump Will Not Turn On
GM
2.40 2.40 1.00
2.10 2.25 1.65
1.80 2.00 2.00
1.40 1.65 2.25
1.17 1.36 2.32
1.10 1.00 2.40
800-773-