Airton 409731 Інструкція з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кондиціонер Airton 409731. Airton 409731 7 сторінок.
Друкувати сторінку
Remote control buttons
ECO button
The mode of energy efficiency. Can only be used in COOL mode, theair conditionerwill settle
automatically the temperature to 23° (factory setting), and the ventilation to auto, in order to save
energy. The letters ECO are then displayed next to the temperature.
Note: In auto speed mode, the temperature cannot be adjusted.
In cooling mode, the SLEEP function cannot operate at the same time as the ECO function. The ECO
function is valid in cooling mode only. No TURBO with the ECO function activated.
SLEEP button
Automatically adjusts the temperature to make the room more comfortable while you sleep at
night. In fashionAir conditioner, the set temperature will automatically increase by 1ºC every 60
minutes, reaching a total increase of 2ºC during the first 2 hours of operation.
In fashionHeating, the set temperature is gradually lowered by 2ºC during the first 2 hours of
operation. After 10 hours of running in SLEEP mode, the air conditioner will stop automatically.
When the modeSLEEPis activated, the " " symbol is displayed next to the temperature on the
indoor unit. The brightness of the digital screen is reduced to provide additional comfort during
the night.
Note: this function is not valid in ventilation mode and AUTO mode. This function is disabled by
default after power-on. This function will be canceled after mode change
TIMER button
While pressing this TIMER button, wait 5
seconds, then press " as you press " " or "
minutes. Hold down "
Disable Timer
Once the timer is activated, to deactivate it, press "Timer" Notes: •
Timer ranges from 0.5~24 hours.
• When the timer is activated, it is visible on the units.
• Timing resets the time to 00:00.
Button
Light)
Press this button to turn off the digital screen of the air conditioner. The "press again
to turn on again" icon.
HEALTH button
The ionizer generates a large amount of negative ions to effectively balance the
amount of positive ions and negative ions in the air, neutralize bacteria and
accelerate dust settling, thereby purifying the air in the room.
When the function is activated, the " " icon appears on the remote control.
Note: this function is not valid on all air conditioner models.
WIFI button
OPTION with WIFI module ref. 409729 only
In normal mode, enables or disables remote control of the air conditioner with a smartphone via the
home WIFI network and/or the 3G/4G/5G cellular network.
This button only works after connecting the WIFI module ref.409729 (sold separately). Refer to
the installation and user guide for the WIFI application, supplied with the module.
" then the "H on / H off)" icon will flash on the remote control.
" and "
", you can increase or decrease the time by 30" or " " to
quickly set the time you want.
The "H on / H off) icon will stop flashing
" to set the timer. Each time
» will disappear,