Atten AT-2233 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент Atten AT-2233. Atten AT-2233 9 сторінок.

Do not obstruct either the air intake or nozzle outlet, as this may cause excessive heat

build up resulting in damage to the tool.

Do not direct the hot air blast at other people.

Do not touch the metal nozzle as it becomes very hot during use and remains hot for up to

30 minutes after use.

Do not place the nozzle against anything while using or immediately after use.

Do not poke anything down the nozzle as it could give you an electric shock. Do not look

down the nozzle while the unit is working because of the high temperature being produced.

Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time.

Do not use this tool to remove paint containing lead. The peelings, residue and vapors of

paint may contain lead, which is poisonous. Any pre-1960 building may have been

painted in the past with paint containing lead and covered with additional layers of paint.

Once deposited on surfaces, hand to mouth contact can result in the ingestion of lead.

Exposure even to low levels of lead can cause irreversible damage to the brain and

nervous system. Young and unborn children are particularly vulnerable.

When removing paint., ensue that the work area is enclosed. Preferably wear a dust mask.

Do not burn the paint. Use the scraper and keep the nozzle at leaf 25 mm away from the

painted surface. When working in a vertical direction, work downwards to prevent paint

from falling into the tool and burning.

Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned

after completing the work.

Prior to assembly and adjustment always unplug the tool

The air temperature can be adjusted to suit a wide range of applications. The table below

suggests settings for different applications.

Setting

Applications

Removing stickers.

Joining adhesives-Large-surface gluing with contact adhesives, activation

of pressure-sensitive adhesives, acceleration of bonding processes,

releasing of bonding points as well as releasing or bonding of edge band or

veneer.

Waxing and de-waxing.

Shrinking PVC wrapping and insulation tubes.

Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water

pipes, as well as for defrosting refrigerators and ice boxes.