DSR PTI900X Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання DSR PTI900X. DSR PTI900X 8 сторінок. Battery tester with printer for 6 and 12 volt batteries and 24 volt charging systems
Друкувати сторінкуSETTINGS AND INFORMATION RETRIEVAL
BEFORE CONNECTING THE TESTER
1. Make sure you have put the six
1.5V AA batteries into the battery
compartment. NOTE: Nothing will be
seen on the display screen until the
tester is connected to a battery.
2. Before you test a battery in a vehicle,
turn off the ignition, all accessories and
loads. Close all of the vehicle's doors
and trunk lid.
3. Make sure the battery terminals are
clean.
LANGUAGE SELECT
1. Connect the tester to a vehicle battery.
2. Press the FORWARD button twice
to get to the LANGUAGE SELECT
display and press ENTER.
3. Press FORWARD or BACK buttons to
select the language.
4. Press ENTER to return to BATTERY
TEST.
TEST COUNTER (displays the total
number of times tests are performed)
1. Connect the tester to a vehicle battery.
2. Press the FORWARD button three
times to display TEST COUNTER.
3. Press ENTER to display the number of
battery tests and the number of system
tests.
4. Press ENTER and select FORWARD
or BACK button to reset the counter or
to print the counter totals.
5. Press ENTER to return to battery test
mode.
IMPORTANT: For testing 6 and 12 volt
batteries and 24 volt charging systems.
Suggested operational range 32°F (0°C)
to 122°F (50°C) ambient air temperature.
PAPER LOADING
1. Connect the tester to a vehicle battery.
2. Open the clear cover on the top of the
tester.
3. Place the roll of paper in the cover with
the paper lead on the bottom.
4. Insert the paper into the paper slot until
it automatically starts feeding.
5. Make sure the paper comes through
the slot in the clear cover before
closing it.
OPERATING INSTRUCTIONS
•
4
SETTING THE DATE AND TIME
1. Connect the tester to a vehicle battery.
2. Press the FORWARD button four times
to get to the CURRENT DATE/TIME
display.
3. Press ENTER to display ADJUST
YEAR. Press the FORWARD or BACK
button to change the setting.
4. Press ENTER to display ADJUST
MONTH. Press the FORWARD or
BACK button to change the setting.
5. Press ENTER to display ADJUST
DAY. Press the FORWARD or BACK
button to change the setting.
6. Press ENTER to display ADJUST
HOUR. Press the FORWARD or BACK
button to change the setting.
7. Press ENTER to display ADJUST
MINUTE. Press the FORWARD or
BACK button to change the setting.
8. Press ENTER to display ADJUST
SECOND. Press the FORWARD or
BACK button to change the setting.
9. Press ENTER to display BATTERY
TEST.
ADJUSTING THE DISPLAY BRIGHTNESS
1. Connect the tester to a vehicle battery.
2. Press the FORWARD button five times
to get to the BRIGHTNESS display.
3. Press ENTER to display BRIGHTNESS
ADJUST. Press the FORWARD or
BACK button to adjust the brightness of
the display.
4. Press ENTER and the display returns
to BATTERY TEST.
BATTERY TEST
1. Clamp the positive (red) clamp to
the positive (POS, P, +) battery post.
Clamp the negative (black) clamp to
the negative (NEG, N, -) battery post.
2. The screen will come on and display
BATTERY TEST with the voltage of the
battery. Press the ENTER button.
3. The screen will show BATTERY
TYPE and STANDARD SLI. Press the
FORWARD or BACK button to change
the battery type. Once the correct battery
type has been selected, press ENTER.
4. The screen will show SELECT RATING.
Press the FORWARD or BACK to
change the battery rating. Once the
correct battery rating has been selected,
press ENTER.
•