Attero Tech unAIO2X2+ Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису Attero Tech unAIO2X2+. Attero Tech unAIO2X2+ 15 сторінок. 2x2 aes67 interface
Друкувати сторінку1 – Overview
The unAIO2X2+ is a 2-in/2-out AES67 audio interface. It's ideal for adding 2 channels of AES67 audio I/O in a small,
unobtrusive form factor for installed sound applications. The two inputs use 3-pin de-pluggable connectors for balanced
or unbalanced I/O connectivity and support either mic or line level signals. Each input also features a 48V phantom power
option. The two outputs also use 3-pin de-pluggable connectors and each provides a balanced line level output. Each
output also features software adjustable volume control.
Connection to the audio network is provided by a single Ethernet RJ45 connector on the back of the unit.
The unAIO2X2+ can be powered by a 24V DC wall wart (ordered separately) but it also supports the use of PoE instead.
This allows the unAIO2X2+ to be powered over the network cable from a suitable PoE source (IEEE802.3af). The PoE power
option is particularly useful if the unAIO2X2+ is mounted in a remote location where access to a mains outlet is limited
or indeed, nonexistent.
The unit comes in a small form factor with integrated mounting bracket allowing it to be mounted discretely in small
spaces (such as under desks) close to the sources or sinks thus reducing the amount of analog cabling that may be
required.
Attero Tech unIFY Control Panel application can be used to configure the device-specific features. It is also used to
configure its AES67 transmit and receive streams as well.
The unAIO2X2+ also supports control by third party systems allowing external configuration of its settings such as
phantom power and input gain in real time. Further information on 3
in section 3.5.
1.1 – What's in the Box
The unAIO2X2+ comes supplied with the following
unAIO2X2+ device
o
1.2 – Optional Extras
All of the following are available as options for the unAIO2X2+ that may be ordered separately:
A 24 V DC power supply is available if PoE power is not desired or available – P/N: 900-00175-01
o
Attero Tech LLC 2018
Figure 1 - unAIO2X2+ front and back
Page 4
User Manual
party control can be found later in this document
rd
unAIO2X2+
614-00040 Rev 01