Attero Tech unD6IO Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису Attero Tech unD6IO. Attero Tech unD6IO 18 сторінок. 4x2 multi-io dante wall plate interface
Друкувати сторінку1.5 – Error Reporting
The unD6IO is equipped with error reporting features. Upon power up, the front panel power LED will briefly light red and
then change to green if the device boots successfully. If the LED remains on solid red, this indicates a device failure. If
power cycling the unit does not correct this problem, contact Attero Tech technical support.
1.6 – Hardware Connections
The unD6IO provides balanced audio outputs to external analog audio equipment. Refer to the following diagrams and
instructions for connecting different types of audio devices to the outputs of the unD6IO. Professional grade audio cabling
is recommended to achieve the best audio performance throughout the system.
1.6.1 – Balanced Output to a Balanced Input
1.6.2 – Balanced Output to an Unbalanced Input
Attero Tech LLC 2017
Balanced Output
Terminal Block Plug
GND
-
+
3-Wire Cable
Balanced Output
Terminal Block Plug
GND
-
+
3-Wire Cable
Figure 6 - Balanced Wiring Guide
Balanced Output
Terminal Block Plug
GND
-
+
2-Wire Cable
Balanced Output
Terminal Block Plug
GND
-
+
2-Wire Cable
Figure 7 – Unbalanced Wiring Guide
XLR-M
Pin 1
1
Pin 3
Pin 2
3
TRS Plug
Sleeve
1
Ring
Tip
3
TS Plug
Sleeve
Tip
RCA Plug
Sleeve
Tip
Page 9
unD6IO
User Manual
2
2
614-00029 Rev 02_b