3onedata ES5018 Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач 3onedata ES5018. 3onedata ES5018 20 сторінок.

User manual

5.7.2 Restore Factory Config

Picture 5.7.2.1 Restore Factory Config

Users can factory reset the configurations, IP addresses and user's passwords.

If the IP address or password is forgotten, please factory reset by connecting Port 9 and Port 16. Please follow the

instruction:

Step one: Connect Port 9 and Port 16 with a RJ45 cable, the switch will reboot and factory reset.

Step Two: Several seconds after the connection, LED lights of all ports will flash for twice and finish the factory

reset. After the lights flash, please disconnect the two ports.

After factory reset, please login the management system again. The login process is the same with first login.

Picture 5.7.3.1 Config Management

This management page enables configure the saving, uploading and downloading of data. users can backup and

recover the system configuration in this page.

Notes:

1. Please save the configurations, or the data will be lost after rebooting the switch.

2. All the modifications operated on configuration pages need to be saved here, or the modification will be

ineffective after system rebooting.

Picture 5.7.4.1 Reboot

The software upgrading and some configurations can only work after rebooting the switch system, please reboot

the switch.