Attero Tech ZIP4-3G Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофон Attero Tech ZIP4-3G. Attero Tech ZIP4-3G 16 сторінок. Ip audio 4-button paging station
Друкувати сторінку3.1.4 – Plug-in Setup
The plug-in for the Zip4 is designed to work in a similar way to
the Q-SYS Virtual Paging Station component with the many of the
configuration options being the same as those seen in the VPS.
*Note: Some of the configuration for paging is done using Q-SYS
Administrator. Plug-ins *DO NOT* automatically pick up changes
made by Q-SYS administrator. Each Zip4 plug-in will have to be
manually updated to get the latest settings by clicking the
"Refresh" button.
*Note: To ensure correct operation, the name of all each "tag"
and zone *MUST* be unique.
3.1.4.1 – Zone / Zone Tag setup
Each button on the Zip4 can be assigned a zone group which
comprises of a single zone or a specific group of zones of the
PARouter. Assignment is done using the combo boxes below each
button. A button can be left unassigned if it is not required.
Pressing a group button on the device that has no assigned zone
or tag has no effect.
The group buttons in the plug-in mirror the state of the group
buttons on the device the plug-in is connected to. When a zone
button is pressed it toggles the selected state of that zone group.
The zone group indicator turns green if the zone is selected.
During operation, if pages elsewhere on the system affect any of
the assigned zone groups on this device, they will be marked busy
and the zone group indicator will turn red. If the zone group is
both selected and busy, the group indicator will turn yellow.
*Note: The indicators shown in the plug-in mirror the Zip4 device
state.
3.1.4.2 – Paging Configuration
Each Zip4 station allows paging configuration using the
parameters defined in the "Paging Config" section of the plug-in.
If the "Default Zone" parameter is set to yes, a second set of
parameters is also shown that relate purely to the default zone
pages. This means the default page can be setup completely
different to regular group pages.
Page Mode: Configures the page mode to one of three different
options: Live, Delay or Auto. Live pages connect the microphone
direct to the output, so any speech is heard live. Delayed pages
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260) 496-9668 ⁞ www.atterotech.com
are first recorded then played back later to the required zones.
"Auto" will activate a live page in possible and switch to a
"delayed" page if the required zones are busy.
Priority: Determines the importance of a page. The options
available are based on the priority configuration set using the Q-
SYS Administrator tool.
Max Page Time: Sets time limit on the maximum length of a page.
Options are "Not Limited", "30 Seconds", "60 Seconds", "90
Seconds", "120 Seconds", and "240 Seconds".
Preamble Dir & Msg: The preamble fields enable pages to be
prefixed with a common audio clip. Q-SYS Core DSPs contain
some default audio clips. If a custom clip is required, this must
be
pre-loaded
into
the
Administrator. The "Directory" field lists all folders that contain
supported audio files that can be used as a preamble. The "blank"
option represents the "root" folder which contains default audio
files. The "Msg" field lists the supported audio files within the
selected directory that can be used. If the "Msg" field is empty, no
preamble will be played for a page.
*Note: Empty folders or folders not containing supported audio
files will not be included in the "Dir" drop-down list.
3.1.4.3 – Brightness
3.1.4.4 – Auto Cancel
These controls only appear when the "Auto
cancel property is Set to "Yes". The auto
cancel only works on pages that record the
message for later playback. The recorded
page can be cancelled by keeping the audio
level below the specified threshold for a
specified amount of time. The threshold and the time are both
configurable. If successfully cancelled, the "Ready" indicator will
turn green even though the "PTT" button remains pressed.
This feature is useful for instances where the person initiating the
page, speaks incorrectly and wishes to cancel the page and re-
record it for correct delivery of the message.
DSP
beforehand
using
Q-SYS
Configures the brightness of the
various indicators on the ZIP4
can also be set from the plug-in.
There are separate controls for
the red LED's, Green LED's and
the back light. Values range from
0 (off) to 255 (fully on)
Page 12