DStv 1 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач DStv 1. DStv 1 17 сторінок.
Друкувати сторінку
- 1. Product Overview
- 2. LNB Requirements
- 3. Connecting the Inputs from Your Satellite Dish
- 4. Twin LNB Connection Diagram (IS20 Only)
- 5. Twin LNB Connection Diagram (E36B Only)
- 6. Quad LNB Connection Diagram
- 7. 3 Cable Quad LNB Connection (E36B Angola and Mozambique Only)
- 8. Quattro LNB Connection
- 9. Connecting the Switch to Your Decoder(S)
- 10. Connecting the Dstv Switch (5-1) to One Dstv Explora
- 11. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (IS20)
- 12. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (E36B Angola and Mozambique Only)
- 13. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (E36B)
- 14. Connecting the Dstv Switch (5-1) to One Dstv Explora and One to Four Single View Decoders
- 15. Connecting the Dstv Switch (5-1) to One Dstv Explora and One 2 Tuner Decoder
- 16. Connecting the Dstv Switch (5-1) to One Dstv Explora and One 4 Tuner HD PVR
The DStv Switch (5-1) has two Explora outputs (labelled A and B) and four
normal multiswitch outputs (labelled 1 to 4).
• The Explora outputs can only be connected to a DStv Explora, they aren't
designed to connect to other decoder models. (Note: The DStv Switch (5-1)
can only be connected to one DStv Explora at any one time.)
• The four normal multiswitch outputs can be connected to up to four single
view decoders, one 4 Tuner HD PVR, or a mix of DStv decoders (other
than the DStv Explora). Again, remember that the DStv Explora cannot be
connected to these particular outputs.
These diagrams exclude the connections between decoders that are required for XtraView. For
information on XtraView installations, including connections and settings, please contact a DStv
Accredited Installer or go to www.dstv.com
Connecting the DStv Switch (5-1) to one DStv Explora
Once the switch has been connected to the satellite dish, use the
supplied cable and connect output A or B on the switch to the input
labelled UNICABLE™ IN on the back of your DStv Explora.
6
Connecting the Switch to your Decoder(s)
H/L
V/L
H/H
1
2
3
V/H
DStv Explora
A
B
4
DStv Switch - User Guide